Clay Brick Continuous Cutting Machine for Brick Factory Clay Clay Brick Making Machine Automatic

Continuous Cutting Machine for Clay Brick Production

1. Overview

The Continuous Cutting Machine is a key shaping device in the clay brick production line.
It is used to cut the continuous clay column extruded by the vacuum extruder into individual green bricks of precise size.
This equipment features high automation, cutting accuracy, stable operation, and easy maintenance, ensuring consistent brick dimensions and smooth surfaces — critical for high-quality drying and firing performance.

Our product pricing is customized according to your production capacity requirements and detailed project drawings, ensuring the most cost-effective solution for your brick plant.

2. Working Principle

(1) The vacuum extruder extrudes the clay into a continuous rectangular mud column.

(2) The mud column is guided onto the conveyor system and enters the cutting area.

(3) The machine uses vertical cutting wires and horizontal cutting wires to complete:

Vertical cutting → Divides the clay column into multiple rows;

Horizontal cutting → Cuts the rows into single bricks according to the required height.

(4) The cut green bricks are automatically transferred and neatly arranged onto drying or kiln cars.

3. Main Components

(1) Mud Feeding System
Equipped with guide plates and pressure rollers to ensure stable and aligned feeding of the mud column.

(2) Vertical Cutting Frame
Uses multiple evenly spaced high-strength cutting wires to divide the clay column into precise widths.

(3) Horizontal Cutting Frame
Equipped with parallel cutting wires driven by a crank linkage or servo motor for accurate reciprocating cuts.

(4) Transmission System
Composed of a reducer, chains, and belt drives — ensuring synchronized, smooth, and low-noise operation.

(5) Electrical Control Cabinet
Controlled by PLC automation; cutting speed and length can be adjusted easily.
Includes manual/automatic modes and full safety protection.

(6) Brick Transfer System
Automatically transfers mud and finished green bricks, seamlessly integrated with the stacker or loading system.

4. Technical Specifications

(Values below are for reference and can be customized according to project requirements)

5. Performance Features

(1) High Cutting Precision

Uses durable high-tension steel wires and precise guide alignment.

Dimensional tolerance ≤ ±1 mm.

Smooth cutting surface without burrs or deformation.

(2) High Efficiency & Automation

Fully integrated with the vacuum extruder and stacking system for continuous production.

Intelligent sensing adjusts cutting rhythm in real time.

(3) Easy Maintenance

Modular design; quick replacement of cutting wires and cleaning of clay residue.

Key parts use wear-resistant alloys with sealed bearings for long service life.

(4) Stable & Safe Operation

Equipped with anti-deviation sensors, wire-break detection, and emergency stop functions.

Rigid frame ensures low vibration and stable performance.

(5) Customizable Design

Optional configurations available for various brick sizes, extruder models, and capacities.

Can be equipped with automatic wire-change systems and mud centering devices.

6. Application Range

(1) Suitable for clay, shale, coal gangue, and fly ash brick production lines.

(2) Compatible with all types of vacuum extruders.
(3) Applicable for solid bricks, hollow bricks, load-bearing bricks, and special-shaped bricks.

7. Typical System Integration

(1) A standard continuous cutting system includes:

(2) Vacuum Extruder → Mud Conveyor → Continuous Cutting Machine → Automatic Stacking System → Drying Car Conveyor.

8. Customer Benefits

(1) Ensures consistent brick dimensions and reduces rejection rate.
(2) Improves automation and production efficiency.

(3) Optimizes drying and firing performance, saving energy.

(4) Enhances overall plant productivity and product appearance quality.

● Company profile

Xi'an Brictec engineering Co., Ltd. (abbreviation: Xi'an Brictec) was founded in 2011. It employs senior Italian engineers to work with domestic experts, creating a strong technical team by combing the European and Chinese technologies. The company is devoted to provide clients multiple professional brick making solutions, including building structure bricks, decorative bricks,wall cladding bricks, paver and dry press bricks, etc.

Business Scope

(1) Design and engineering
Xi’an Brictec offers process design and engineering service for clients to have a fully automated modern bricks and tile factory, including chamber drying, tunnel drying, rapid drying and tunnel kiln and other process design and technical consultation, among which the dryer and kiln constructing and engineering is the utmost importance in our general contracting program. This part is the key to achieve production targets by using key technologies in the project.

(2) Machinery manufacturing and supply
Xi’an Brictec Machinery Equipment Manufacturing Co., Ltd. introduces the latest European brick machinery technology for smooth production domestically. In 2018, Xi’an Brictec built cooperation relationship with Shandong Mine Machinery Cosmec Materials Machinery Co, Ltd, jointly R &D and manufacturing automation equipment for brick making.
1.Cutting machine, setting machine, automatic unloading and packing machine and automatic packaging machine;
2.Ferry car, cone blower, stepping machine, pulling machine, kiln car and other kiln automation equipment;
3.Gas burning system (natural gas/liquefied petroleum gas / coal gas), liquid burning system (heavy oil/waste tire oil), solid fuel burning system (pulverized coal, petroleum coke, rice husk, palm kernel husk, coconut husk, cottonseed husk, etc.)

(3) Installation, maintenance and production guarantee service
Xi’an Brictec provides production, commissioning and maintenance services to brick making factories, helping clients to make bricks easily.

● Project reference from Xi’an Brictec

1.Shaoxing Lvzhan environmental protection technology Co., Ltd

Xi’an Brictec designed this Lvzhan project in 2023. The project has annual output of 300,000㎡ of sintered bricks and prefabricated brick wall by using local solid waste such as chemical contaminated soil, construction residue, printing and dyeing sludge as the main raw materials, etc. so as to make high quality sintered bricks making, and 60%-70% of electricity needed for production line is from the photovoltaic power generation on the factory roof. Xi’an Brictec provides whole package service from the preliminary planning and design of the project to the supply of core equipment in the later stage. Single layer tunnel dryer process is adopted with natural gas burning system for tunnel kiln (7 meters inner width). Xi’an Brictec has delivered a very satisfactory EPC project to our client, and also set a new benchmark for the solid waste recycle and utilization in the industry.

2.Najmadin project in Iraq

This project was jointly designed and implemented by Xi’an Brictec and China National Building Materials Co., Ltd. in 2023, with a daily output of 750 tons of sintered bricks. It is located in Sulaimani Province, Kurdish region of Iraq, and the raw material is shale. Xi’an Brictec has participated in project planning, design, construction and commissioning. Single layer tunnel dryer process is adopted, and Heavy oil/liquefied petroleum gas dual fuel serve as the fuel for dryer and tunnel kiln (9 meters cross-section) . In this project, Xi’an Brictec competes with European production line on the same platform and wins honor for the country. So far the project has been put into production, expecting to meet the production target in May 2024.

3.Antique Bricks Project for Yan'an Green Building Material Recycling Industrial Zone

The project was designed and implemented by Xi’an Brictec as a whole in 2022, mainly to produce antique bricks, facing bricks and paver, etc.. The raw material is high-quality shale and purple sand soil, and the fuel is natural gas. The entire production line combines two shaping methods (extruding and pressing), and uses chamber dryer for drying and tunnel kiln for burning, and integrates three shuttle kilns for antique bricks production. Xi’an Brictec was fully engaged and offer excellent package service in the project in the preliminary process design, dryer construction and core equipment supply and production commissioning. This automatic degree applied in this project is the highest domestically, also meets the advanced international level.

4.Guangdong Baolihua Electric Power Co. Ltd. brick making project with high content fly ash as raw material

Xi’an Brictec designed the whole project and led multiple raw material batching experiments, and finally got the result of 65% fly ash content being the perfect ratio to produce qualified sintered bricks. And because of this project, Xi’an Brictec has obtained the invention patent for making bricks with high content fly ash added.

5.ECO CERMICS project in Bangladesh
This is an EPC project by Xi’an Brictec. Single-layer tunnel drying process is adopted with two 4.8-meter tunnel kilns in use. Bongianni soft plastic extruder from Italy, roller and pulverized coal burner invented by Xi’an Brictec are also applied in this project. Invested by GPH, the 3rd largest cement enterprise in Bangladesh, the production line has the characteristics of highest automation and largest production scale. The factory roof is laid with solar photovoltaic, offering 60% power generation for production line.

6.Uzbekistan Project

The project is for the high-grade brick making production, ranking top three in Uzbekistan. It has two production lines and Xi’an Brictec is responsible for the whole set of cutting, loading & unloading automation system and the natural gas burning system. Client thinks highly of Xi’an Brictec and compliments it as the most reliable partner, offering the easier natural gas burning system with lower energy consumption than European burning system. With the assistance of Xi 'an Brictec, the client uses tire pyrolysis oil to make bricks in its Phase II project, producing high quality bricks under low cost.
Xi 'an Brictec will continue to make breakthrough in every aspects, continuously providing all various tailor-made brick making solutions for our valuable clients!

● Business region

Over 30 countries and regions including China, Russia, Kosovo, Kazakhstan, Uzbekistan, Tajikistan, Vietnam, Malaysia, Iraq, India, Bangladesh, South Africa, Zimbabwe, Peru, Colombia...
In addition, the company has local offices and after-sales service centers in countries such as Iraq, Kazakhstan, Bangladesh, Uzbekistan, Zimbabwe and other.
Adhering to company’s culture and spirit “ Struggle-oriented and customer-centered”, Xi’an Brictec is here to help you make bricks easily!