Wood Carbonizing Furnace for Charcoal Making 4-8 Hours Carbonization Time No Smoking

Gongyi Facoty Wood Carnizing Furnace Carbonization Stove for Charcoal Making

The hoisting type wood carbonization furnace manufacturerd is mainly used to carbon the briquette made by the briquette making machine or the original wood log, bamboo, coconut shell, rice husk, peanut shell, palm fiber, etc into charcoal.

Carbonizing furnace for charcoal is energy-saving type which includes one outer stove, three set of inner stoves, smoke recycling system and the 3 ton hoisting tools.

Structure of wood carbonization furnace:

♦ Ourter stove

♦ Inner stove

♦ Cover

♦ Hoist

♦ Purify system

Procedures on inputting the raw material

1. Open the cover of the furnace

2. Hoist the inner stove out of the furnace and open the cover of inner stove, then make it into a tilt for easy

material loading.

3. When loading1/2 material, put one high temperature resistant steel wire mesh and continuous adding material above the steel wire mesh.

4. After finish inputting the material, close the cover of inner stove and hoist it into the carbonization furnace. Then put some clay or sand among the inside stove and outside stove for insulation.

Advantages of wood carbonization furnace

1. Easy operate and maintain.

2. High carbonization rate, With smoke removal equipment. It is environmental friendly.

3. 8 hours per stove and work continuously.

4. The combustible gas generated during carbonization process will come down along the pipes to the lighting hole to become fuel to heat the stove.

5. With hoisting tools, which can hang the inside stove very easily.