Nano ceramic film has the following advantages:
I. Excellent heat insulation performance
Efficiently blocking infrared rays: Nano ceramic film can
effectively block infrared rays in solar radiation and reduce the
amount of heat entering the vehicle. Infrared rays are one of the
main sources of solar heat. The blocking rate of infrared rays by
nano ceramic film can usually reach a relatively high level,
thereby significantly reducing the temperature inside the vehicle.
For example, in hot summer, the internal temperature of vehicles
installed with nano ceramic film is significantly lower than that
of vehicles without film, providing a more comfortable environment
for drivers and passengers, while reducing the frequency of air
conditioner use and lowering fuel consumption.
Low emissivity: Nano ceramic film has a low emissivity, which means
it can reflect most of the heat instead of absorbing it and then
radiating it into the vehicle. Compared with traditional metal
films, nano ceramic films are more stable in heat insulation
performance and will not experience a decline in heat insulation
effect due to long-term exposure to sunlight.
For example, some high-end nano ceramic films can still maintain
good heat insulation effects after long-term exposure to the sun,
and the temperature inside the vehicle will not increase
significantly.
II. High definition and low glare
Excellent optical performance: Nano ceramic film adopts advanced
nanotechnology and has extremely high transparency and definition.
It will not make the line of sight blurred like some inferior films
and affect driving safety. Whether it is day or night, drivers can
clearly see the scenes outside the vehicle and reduce visual
fatigue.
For example, when driving at night, nano ceramic film will not
produce excessive glare, enabling drivers to see the road and other
vehicles better and improving driving safety.
Reducing glare interference: Nano ceramic film can effectively
reduce glare interference from light sources such as the sun and
car lights. Glare will make the driver's eyes uncomfortable, affect
the line of sight, and increase driving risks. Nano ceramic film
reflects or scatters glare through a special optical structure to
reduce its impact on drivers.
For example, on a sunny day with strong sunlight, nano ceramic film
can reduce the discomfort of direct sunlight on the eyes and allow
drivers to drive vehicles more comfortably.
III. Environmental protection and health
No metal components: Nano ceramic film does not contain metal
components, avoiding the problem of possible interference with
electronic device signals caused by traditional metal films. At the
same time, it will not gradually oxidize during use like metal
films and affect appearance and performance.
For example, vehicles installed with nano ceramic film can normally
use electronic devices such as GPS and mobile phones without
weakening or interrupting signals. Moreover, nano ceramic film has
a longer service life and does not need to be replaced frequently.
Safe and non-toxic: Nano ceramic film is made of environmentally
friendly materials, non-toxic and odorless, and harmless to the
human body and the environment. Compared with some films containing
harmful substances, nano ceramic film is more safe and reliable,
allowing drivers and passengers to use it with confidence.
For example, some inferior films may release harmful gases at high
temperatures, which will harm human health. However, this situation
will not occur with nano ceramic film, providing a healthy
environment inside the vehicle.
IV. Strong durability
Good scratch resistance: Nano ceramic film has relatively high
hardness and strength and can resist scratches and wear in daily
use. Even when cleaning the vehicle or encountering a slight
collision, nano ceramic film is not easily damaged and maintains
good appearance and performance.
For example, when using ordinary cleaning tools to wipe the windows
installed with nano ceramic film, there will be no scratches, and
the surface of the film is still as smooth as new.
Excellent weather resistance: Nano ceramic film can withstand
various harsh climatic conditions such as high temperature, low
temperature, ultraviolet radiation, acid rain, etc. It will not
have problems such as bubbling, cracking, and fading due to climate
change and always maintains stable performance.
For example, in hot desert areas or cold northern areas, nano
ceramic film can function normally and provide long-term protection
for vehicles.
FAQ
Q1. Can I put my logo on the film?
A: Yes, your logos can be put on the film, also on the boxes &
cartons.
Q2. How can I get samples?
A: Free samples, please contact me by email or online chatting,
samples will be sent to you in one day after I got the shippng
information of yours
Q3. How can you control your quality?
A: 1. Check all the materials before production, pick out all the
bad ones;
2. During the production, workers will check every hour to make
sure the production system runs correct;
3. Goods are 100% tested before delivery to you.
Q4. Can you produce according to my samples?
A: Yes, our factory has specialized technology & advanced
equipment. We will first analyze your sample, and then make the
good according to your samples.
Q5. Will your window tint peel?
A: Qaulity window tint is guranteed not to peel once it has been
curved to the glass.
Q6: How do you make our business long-term and good relationship?
A:1. We support you with good quality and competitive price;
2. Always be here when you need us;
3. You will get new product info. from us so you can get the market
earlier;
4. We respect you and treat you as our friend, no matter where you
are from.
Q7. What is your sample policy?
A: We can supply the sample when we have it in stock, but customers
have to pay the sample charge and the courier fee. For A4 cutting
samples, the samples are free.
Q8. Why choose us ?
We have successful experience of operating the solar film for 8
years in the world.The concept of "innovation, quality, service,
persistence, dedication and gratitude. With professional solar film
knowledge training and technical guidance.