

Add to Cart
FY-800 Fully Automatic Slag Discharge Centrifugal Filter
Centrifugal oil purifier: pure in rotation, protecting the quality
of every drop of oil for you!
Technical parameters | |
Device name | Fully automatic slag removal centrifugal oil purifier |
Project/Model | FY800 |
Filter method | centrifugation |
Slag discharge method | Automatic slag discharge |
drum capacity | 8L |
Maximum throughput | 100L/min |
Recommended traffic | 50-80L/min |
Speed | 3200r/min |
Centrifugal effect G | 1700G |
main motor | 2.2kw2P.380V |
Auxiliary motor | 0.09kw4P.380V |
total power | 2.29kw |
Import pipe diameter | DN25 |
Outlet diameter | DN65 |
Air pressure range | 0.4-0.6 MPa |
Start mode | Inverter starts |
control Panel | touch panel |
Control method | automatic/manual |
Equipment size | 870*860*1550 (mm) |
working temperature | 0~80℃℃ |
Storage temperature | -20-80℃℃ |
weight | 388kg |
Scope Of Application
Working Principle
1. Oil/industrial liquid is delivered to the equipment through the
oil pump. When the oil/industrial liquid and impurity particles
enter the separation rotor, they are subjected to strong
centrifugal force (up to 2000 times the weight of the impurities).
The oil/industrial liquid and impurities move radially to the inner
surface of the rotor. The oil/industrial liquid and the impurities
therein are compressed into a thick layer. Due to the different
centrifugal forces, the oil/industrial liquid flows back to the
transfer tank along the reflux tank. The impurities are adsorbed to
the inner surface of the separator and gradually solidified,
achieving the effect of separating impurities from oil/industrial
liquid, so that the cleanliness of oil/industrial liquid is
continuously improved!
2. Difference from traditional filtering methods: Traditional
(interception) filters intercept impurities through filter media,
and their filtering accuracy is guaranteed by the filter media
used. When the filter media load is too large, that is, the
pressure difference at both ends is too large, there may be a risk
of the filter media being torn (punctured), and the cost of
replacing the filter element is high.
Advantages
1. It can automatically separate the sludge in the oil and automatically remove and discharge the sludge, without manual cleaning and consumables.
2. The frequency conversion design can freely adjust the speed to change the centrifugal force G value.
3. The control panel is a full touch LCD panel, which adopts PLC program design. The filtering time, automatic slag removal time and other settings can be set by yourself.
4. It can quickly separate impurities in oil or water and automatically discharge slag.
5. Separate impurities above 0.45-3μm in oil (phosphoric acid powder, oil sludge and iron powder, etc.).
6. It can realize fixed or mobile filtration to maximize the effectiveness of the equipment.
7. Fully automatic control, automatic slag removal, saving labor.
8. The scraped sludge has a low oil content and can be directly discarded without de-oiling.
9. There is no replacement of filter screens and filter cores, and
no consumables.
Model | L | L1 | W | W1 | W2 | W3 | H | H1 | H2 |
FY-600 | 770mm | 430mm | 940mm | 720mm | 565mm | 220mm | 1560mm | 690mm | 660mm |
FY-800 | 970mm | 530mm | 1050mm | 810mm | 600mm | 220mm | 1620mm | 875mm | 760mm |