Cable Fault Locator for Accurate Fault Distance Measurement and Analysis with Human-Computer Interaction
Certification:CE, ISO
Model NO.:XHGG502
Customized:Customized
Color:Black
Transport Package:Wooden Box with Foam Inside
Trademark:XZH TEST
Contact Now
Add to Cart
Verified Supplier
Address:
Building B8-01, Phase I, Ronghao Industrial City, No. 2098, Weiyang 9th Road, Gaoling District, Xi'an, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
The XHGG502 tdr underground cable fault locator adopts an
industrial-grade 12.1-inch touch all-in-one computer and a simple
operating software interface to realize human-computer interaction
testing. Adopt industrial-grade integrated circuits and devices,
built-in large-capacity lithium-ion battery, stable and reliable,
and easy to use.
This cable fault tester is a special instrument for measuring and
analyzing power cable status and fault distance. This cable fault
tester adopts the combination of modern electronic technology and
computer technology to realize signal filtering, acquisition, data
processing, graphic display, graphic analysis, to complete Cable
speed measurement, cable length testing, cable fault distance
testing.
This cable fault locator is suitable for low-resistance,
short-circuit, open-circuit and disconnection faults of power
cables, high-frequency coaxial cables, street light cables, and
buried wires of various materials with different sections and
different media, as well as high-resistance leakage and
high-resistance flashing. network failure.
Welcome you contact us for more information.
| Product name | Underground cable fault pre-locator(TDR) |
| Model | XHGG502 |
| MOQ | 1 Unit |
| Main function | For underground cable fault rough distance measurement |
| Data sampling rate | 60MHz, 120 MHz, 240MHz, 400MHz |
| Test distance | >60Km |
| The test cable length is set | <1Km (short distance);<3Km (medium distance);>3Km(long distance) |
| Pulse amplitude | 400Vpp |
| Pulse width | 0.1uS and 2uS |
| Reading resolution | 0.1m |
| system test accuracy | Less than 0.5m |
| Pulse coupler withstand voltage | 38kVDC |
| Working conditions | temperature -25ºC~+55ºC, relative humidity 85%, atmospheric pressure 750±30mmHg. |
| Measuring method | Low-voltage pulse method, high-voltage flashover method, multiple pulse method |
XHGG502 ARC Cable fault pre locator
Accurately and quickly detect the main insulation failure of power
cables with voltage levels of 35KV and below; calibrate the cable
length; roughly test cable fault distance
- Pre-locating cable faults with the reflectometer XHGG502 based on the
high voltage flashover method (ie. ICE, DECAY),
arc reflection pulse reflection method (ARC single shot and ARC multi-shot)
| Cable fault pre-locator | XHGG502: for cable fault distance test, include a host and a coupler |
Welcome you contact us for more information and service.Cable fault pre-location: with the reflectometer XHGG502 based on
the low-voltage impulse reflection method(TDR), and high-voltage
decay(flashover) method (DECAY), arc reflection method(single-shot/ multi-shot).
There are three test mode of XHGG502, low voltage pulse, high
voltage flashover, ARC multi-shot.
The below picture shows cable fault distance measured by using ARC
multi-shot test mode of XHGG502.
The below picture shows cable fault distance measured by using high
voltage flashover test mode of XHGG502
The below picture shows cable length or cable open circuit fault
distance measured by using low voltage pulse test mode of XHGG502.
When using the low voltage pulse method, it is not necessary to
connect the high voltage pulse generator. Other test methods must
be used in conjunction with a high-voltage pulse generator.
Cable Fault Locator for Accurate Fault Distance Measurement and Analysis with Human-Computer Interaction
Inquiry Cart
0