Portable Double Shooter Remote Control Safe Cable Piercing Cable Spiker

Working description
For the cable spiker, a single shooter can only produce one short circuit point on the cable at a time, and a double shooter can produce two short circuit points on the cable at a time. Since the three-phase cable is usually in the shape of a "品", if a single shooter is pierced, it will just pierce in the gap of the "品" (that is, the gap between the two phases) without penetrating the entire cable. Existence cannot create a real short circuit, that is, it cannot achieve the purpose of stabbing. It is recommended to use a dual shooter configuration. When the included angle of the dual shooters is not 120°, at least one shooter can achieve the purpose of stabbing and form a short circuit point.

Product Features
1. When the angle between the two shooters is not 120°, at least one shooter can achieve the purpose of piercing and form a short circuit point;

2. It adopts wired + wireless remote control, and can be remotely controlled through a wall;

3. It can be used for both AC and DC, with a built-in lithium battery pack and a large-capacity energy storage device, and has a long charging time;

4. It is small in size and light in weight, very suitable for outdoor use.

Operation interface introduction

1. Grounding: grounding point of the instrument, safety protection;

2. Output 1: used to connect to the shooter body;

3. Output 2: used to connect to the shooter body;

4. Charging: DC12V charging port, connect to a 12V charger to start charging;

5. Switch: turn on/off the working power;

6. Indicator light 1: when output 1 is working, the indicator light is on;

7. Indicator light 2: when output 2 is working, the indicator light is on;

8. Power indicator: when the built-in battery is working, it indicates the battery power in real time.

Field wiring

Packing list

1. Controller: control the shooter to carry out the cable puncture action process;

2. Remote control: The two buttons (A.B) of the remote control correspond to output 1 and output 2 of the controller;

3. Bullet: Loaded into the chamber when stabbing;

4. Shooting nails: put them into the nail tube when stabbing;

5. Shooter

6. Output line: the connection line between the controller and the shooter;

7. Ground wire: the connection wire between the shooter and the ground drill;

8. Ground drill: Generally, there is no formal grounding point on site, so find a reliable ground to insert;

9. Screwdriver, socket, test tube brush: accessories for cleaning the shooter;

10. Power cord (charger): Control box charging cable.

Company profile

XZH TEST is a professional cable fault detection equipment manufacturer. We are a young team. Our development philosophy is humanized management, intelligent cloud-based products, and internationalized operations. Our development mission is to make electrical equipment free from undetectable failures.

Since its inception in 2013, our company has grown to become one of the largest manufacturer of underground cable fault detection equipment in China. An ISO 9001 and CE certified company, we produces a broad range of testing equipment.

What we can do

We have the ability to innovate new products and technologies.

We can provide complete system solutions for your project.

We provide online and offline practical and theoretical training.

We provide instrument repair and calibration.

FAQ

1. Are you a trading company or a manufacturer?
We are a professional manufacturer with more than 10 years of experience. We can strictly control the quality of parts and finished products.

2. What is the delivery time and inventory?
If our best-selling products are in stock, it will be 5-8 working days for shipment. But for mass production and customized production, the time will take 2-4 weeks.

3. What are your payment terms?
Payment ≤ USD 2000, 100% T/T prepayment. Orders over USD 2000 can be negotiated.

4. How long is your product warranty?
We provide 1 year warranty for the equipment.

5. How do you ensure quality?
The product links include R&D, manufacturing, commissioning and technical support, following strict and scientific management principles. Therefore, we can support strong production and R&D capabilities, and can produce high-quality products at competitive prices to meet customers' high requirements.

6. What support can I get?
We will provide training support, marketing support, technical support and supply chain support. You can contact us for more information.

7. Where is your factory? Can I visit your factory?
We are located in Xi'an, Shaanxi, China. We are close to Xi'an Xianyang International Airport, which is about 2 and half hours by plane from Shanghai and Guangzhou. All customers from all over the world are welcome to visit us.

8. How to become your dealer?
Every company interested in power system instruments can contact us without hesitation, including website letters, emails, telephones, etc. We will contact you quickly according to your company information and cooperation intentions.