Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodized PV Bracket Accessories
Brand Name:JIA SHAN
Minimum Order Quantity:1,Piece/Pieces
Delivery Time:15days
Place of Origin:China
Price:USD,1.25-2.26,Piece/Pieces
Supply Ability:200,Piece/Pieces,Month
Contact Now
Add to Cart
Verified Supplier
Address:
No.103,104,1st Floor,Building 8 Phase II Factory Building,No.8 Lutian Road,Lugu Base,Lugu Street,Xiangjiang New Area,Hunan Province.Postal Code:410205
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodized PV
Bracket Accessories
1,Description:
Aging Treatments
When extruded profiles need to enhance their mechanical properties,
the 6000 series alloys must be aged. How much the mechanical
properties can be enhanced depends on the type of alloy and the
conditions of the aging process, which range from natural aging at
room temperature to various higher temperature heat treatments
known as artificial aging.
As far as the strength of 6000 series alloys is concerned, the
direct correlation is that the material is deformed in the process,
for the internal particles to move the impedance of the ability to
move, when the material is given to the stress of the particles
will begin to dislocate and move, and when the stress increases
again and again, the number of such particles to move will be
increased and intensely enhanced, and until the material is damaged
to terminate the ability of the particles to move to the magnesium
siliconization grains to stop.The ability of the particles to shift
is prevented by the magnesium silicide grains, so that the strength
of the material can be increased. The size and density of these
magnesium silicide grains are controlled by aging conditions. A
small number of small, fine magnesium silicide beta double coarse
crystals can slightly prevent shifting from occurring in the
material, but when the number is increased, it can be enough to
inhibit shifting and thus increase the strength of the material, if
the grains grow too large (to become magnesium silicate beta
primaries and beta crystals).Then due to the limited total amount
of available magnesium and silicon will lead to a reduction in its
number, due to the reduction of magnesium silicide grains caused by
the shuttle space to increase the misalignment will be more likely
to occur, the strength of the material will be reduced as a result.
2,Applications:
Mechanical Properties
Mechanical property requirements also impose some constraints on
the extrusion process.It is defined by the extrusion speed and the
temperature of the aluminum blank, which increases the correlation
between the mechanical property and the process variables, and at
the same time combines the surface quality of the finished product,
the extrusion pressure, and other related factors.
In addition, a green demarcation curve is added to represent the
demarcation line where the mechanical properties of the extruded
products are suitable for the requirements. When aluminum blanks
containing coarse magnesium silicide grains are used or when
thicker profiles are extruded, and when mechanical properties are
required to be higher, this demarcation curve will be shifted to
the right, which means that the extrusion speed and the temperature
of the blanks have to be increased in order to achieve the products
with high requirements for the mechanical properties.Because the
purpose of increasing the extrusion speed and preform temperature
is to provide more heat energy to induce greater melting of the
magnesium silicide in the preform.
When the aluminum embryo contains magnesium silicide beta double
primary crystals and beta primary crystals of these fine grains
extruded profile section thickness is thin, the mechanical
properties of the requirements of the low, then the demarcation
curve will be shifted to the left, manipulation of the extrusion
speed opinion of the aluminum embryo temperature of the
requirements of the two will be reduced, the finished product is
also easy to achieve the mechanical properties.
Engine support: Supports the engine to reduce vibration and noise.
3,Specifications:
| Product | Aluminium Extrusion Parts |
| Material | AL2024, AL5052, AL6061, AL6063, AL7050, and AL7075 |
| Color | Green, Grey, Black, White, (RAL series)etc. |
| Surface treatment | Mill finish, anodized, electrophoretic coating, powder coating, thermal break, wood grain/wood-in-shift, etc. |
| Lead Time | 1-2 weeks for sample,2-5 weeks for bulk order |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
4,Feature Advantage:
The versatility of aluminum extrusions supports the fast-paced innovation inherent in the electronics industry. It is suitable for cost-effective solutions with consistent quality parts prototyping and mass production.
Examples of aluminum extrusion applications in the electronics industry:
CPU and GPU heat sinks
Electronic equipment housing
LED panel frame
Server and network equipment rackPower supply housing
Electronic instrument case
Cooling body for high power electronic devices
Rails for mounting electronic components
Robot structural component
Borders for monitors and displays
5,About us
Aluminum 5083 1030 3003 6061 6063 Extrusion Part Sanodized PV Bracket Accessories
Inquiry Cart
0