

Add to Cart
Product features:
1, automatic thermocouple position setting import.
2, temperature curve evaluation automation.
3, automatic visual operation instructions.
4, when the instrument is overheated or the battery is too low, it
will automatically give instructions to stop the temperature curve
test.
5, automatic retrieval can ensure the integrity of the temperature
curve data.
6, the stability of the production process is automatically
confirmed.
7. Product analysis accuracy and stability are improved, and test
data is more accurate.
8, stainless steel heat insulation sleeve better protect the
instrument from external damage.
Matters needing attention
1. First of all, check whether the battery power is sufficient, and
the surface temperature should not be higher than 40 ° C. In order
to test the accuracy, please try to test the surface temperature of
the instrument below 40 ° C.
2. PC terminal communicates with the instrument to confirm matters:
the instrument thermocouple must detect and collect the constant
temperature before proceeding to the next test.
3. The insulated box can withstand the temperature at 280℃ for 9
minutes at most, please exceed this range and ensure that the
internal temperature of the instrument does not exceed 85℃.
4. If you do not use the battery for a long time, please turn off
the power and take out the battery. If you need to use the battery,
please try to keep the battery in an environment below 60 ° C. The
normal sound is about every 5 seconds, several sounds.
5. Please be sure to cover the heat insulation box when the furnace
is finished. When you hear a sound of "click", seal the yellow heat
insulation cotton.
6. Connect only one furnace temperature tester recorder to the
computer at a time. You cannot connect multiple loggers to the same
USB port on your computer and select one of them.
7. After a furnace again, wait for the heat insulation box to cool
before use