Resistors and capacitors are fundamental components in electronic
circuits, and their performance can be significantly affected by
temperature and humidity. Ensuring their reliability and stability
under various environmental conditions is crucial for the proper
functioning of electronic devices. Our budget - friendly
temperature and humidity controlled chamber for resistors and
capacitors is a cost - effective solution designed to meet the
testing and storage needs of these essential electronic components.
This chamber provides a controlled environment for simulating
different temperature and humidity levels, enabling manufacturers,
researchers, and quality control teams to evaluate and optimize the
performance of resistors and capacitors.
We understand the importance of cost - efficiency in the
electronics industry, especially when it comes to testing and
storage equipment. Our chamber is designed with a focus on
delivering high - quality performance at an affordable price. By
using cost - effective materials and streamlined manufacturing
processes, we have been able to keep the initial investment low
without compromising on the essential functionality. Additionally,
the chamber is energy - efficient, resulting in lower operating
costs over its lifespan.
Despite its budget - friendly nature, the chamber offers precise
temperature and humidity control. The temperature can be adjusted
within a range suitable for testing resistors and capacitors,
typically from - 70°C to 150°C, with a precision of ±1°C. Humidity
levels can be set from 10% to 90% relative humidity (RH), with an
accuracy of ±5% RH. These precise control capabilities allow for
accurate simulation of different environmental conditions that
resistors and capacitors may encounter in real - world
applications.
The chamber provides a variety of test modes to meet different
testing requirements. It supports steady - state testing, where the
temperature and humidity are held constant for a specific period to
evaluate the long - term stability of the components. Cyclic
testing is also available, which involves cycling the temperature
and humidity through predefined ranges to simulate the effects of
changing environmental conditions over time. Custom - programmed
test sequences can be created as well, enabling users to mimic
specific real - world scenarios that the components might
experience.
Resistors and capacitors are often small in size, and our chamber
is designed to be compact and space - saving. It has a relatively
small footprint, making it suitable for installation in
laboratories, production facilities, or even small workshops with
limited space. The interior of the chamber is efficiently organized
to accommodate a sufficient number of components for testing or
storage, maximizing the use of available space.
The chamber is equipped with a user - friendly interface that makes
it easy to operate. The control panel features clear displays and
intuitive buttons for setting temperature, humidity, and test
modes. Even users with limited technical knowledge can quickly
learn how to operate the chamber. Additionally, the interface
provides real - time information on the current temperature and
humidity levels inside the chamber, allowing users to monitor the
testing or storage process at a glance.
Built to last, the chamber is constructed using durable materials
that can withstand the rigors of regular use. The exterior is made
of high - quality, corrosion - resistant metal that provides
protection against physical damage and environmental factors. The
interior is lined with materials that are resistant to moisture and
chemicals, ensuring a stable and reliable environment for the
components. The components of the temperature and humidity control
systems are also selected for their durability and long - term
performance.
| Model | THC-225 | THC-408 | THC-800 | THC-1000 |
| Inside dimension(W x D x H) mm | 50 x 75 x 60 | 60 x 85 x 80 | 100 x 100 x 80 | 100 x 100 x 100 |
| Outside dimension(W x D x H) mm | 75 x 165 x 170 | 85 x 175 x 190 | 125 x 190 x 190 | 125 x 190 x 210 |
| Internal material | #304 Stainless Steel |
| External material | Powder coated #304 Stainless Steel |
| Temperature range | + 150℃~ - 70 ℃ |
| Humidity range | 5% ~ 98% R. H |
| Temperature resolution ℃ | 0.01 |
| Humidity resolution % R. H. | 0.1 |
| Temperature stability ℃ | ±0.3 |
| Humidity stability % R. H. | ±2 |
| High temperature ℃ | 100 | 100 | 100 | 100 |
| Heating time (min) | 20 | 30 | 30 | 30 |
| Low temperature | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 | 0, -40, -70 |
| Cooling time (min) | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 | 20, 50, 70 |
| Air circulation system | Mechanical convection system |
| Cooling system | Imported compressor, fin evaporator, gas condenser |
| Heating system | Sus304 Stainless steel High-speed heater |
| Humidification system | Steam Generator |
| Humidification water supply | Reservoir, Sensor-controller solenoid valve, recovery-recycle
system |
| Controller | Touch panel |
| Electrical power requirements | Please contact us for requirements of specific models |
| Safety device | Circuit system load protection, compressor load protection, control
system load protection, humidifier load protection, overtemperature
load protection, fault warning light |
The budget - friendly nature of our chamber makes it an attractive
option for electronics manufacturers, researchers, and small
businesses. The low initial investment and energy - efficient
operation result in significant cost savings over time. This allows
companies to allocate their resources more effectively, especially
in cases where multiple chambers may be required for different
testing or storage needs.
By subjecting resistors and capacitors to controlled temperature
and humidity conditions, manufacturers can identify potential
performance issues early in the production process. This enables
them to make necessary adjustments to the manufacturing process or
component design, resulting in higher - quality components. The
ability to simulate real - world environmental conditions also
ensures that the components are reliable and stable when used in
actual electronic devices.
The electronics industry is subject to various international and
national standards regarding the performance and reliability of
components under different environmental conditions. Our chamber is
designed to help manufacturers and researchers comply with these
standards. By conducting accurate and reliable tests in the
chamber, they can ensure that their components meet the required
specifications, facilitating product certification and market
entry.
For researchers, the chamber provides a valuable tool for studying
the behavior of resistors and capacitors under different
temperature and humidity conditions. It allows them to explore new
materials, designs, and manufacturing processes to improve the
performance and characteristics of these components. The ability to
precisely control the environment enables in - depth research and
the development of innovative solutions.
In the production process, the chamber is an essential tool for
quality control. By testing a sample of components from each
production batch in the chamber, manufacturers can ensure that the
components meet the specified quality standards. This helps in
identifying and rectifying any manufacturing defects early,
reducing the number of faulty components that reach the market and
improving overall product quality.
Electronics manufacturers use the chamber to test resistors and
capacitors during the production process. By subjecting the
components to different temperature and humidity conditions, they
can verify their performance and reliability. This helps in
ensuring that only high - quality components are used in the final
electronic products, reducing the risk of product failures.
Researchers in the field of electronics use the chamber to conduct
experiments on new types of resistors and capacitors. They can
study the effects of temperature and humidity on the electrical
properties of these components, which can lead to the development
of new materials and designs with improved performance.
Quality control teams use the chamber to perform batch testing of
resistors and capacitors. By testing a representative sample of
components from each production batch, they can ensure that the
components meet the required quality standards. This helps in
maintaining the overall quality of the electronic products that use
these components.
The chamber can also be used for storing resistors and capacitors
under controlled temperature and humidity conditions. This is
particularly important for components that are sensitive to
environmental changes and need to be stored for an extended period.
By maintaining the proper storage conditions, the lifespan and
performance of the components can be preserved.
Our budget - friendly temperature and humidity controlled chamber
for resistors and capacitors is a valuable asset for the
electronics industry. With its cost - effective design, precise
control capabilities, multiple test modes, compact size, user -
friendly interface, and durable construction, it provides a
practical and reliable solution for testing, research, and storage
of these essential electronic components. Whether you are an
electronics manufacturer looking to improve product quality, a
researcher exploring new technologies, or a quality control
professional ensuring compliance, our chamber can meet your
specific needs. Contact us today to learn more about how our
product can enhance your operations in the electronics field.
.
