100W 200W 250W LED Solar Street Light Outdoor IP65 Galvanized Sheet with Motion Sensor

100W 200W 250W LED Solar Street Light Outdoor IP65 Galvanized Sheet with Motion Sensor

Advantages of galvanized sheet solar street light:

1. Cost advantage: lower material and manufacturing threshold
(1) The cost of raw materials is significantly reduced
The raw material price of galvanized sheet (hot-dip galvanized steel sheet) is usually 30%-50% lower than that of aluminum alloy. Taking Q235 galvanized sheet as an example, the price per ton is about 4000-6000 yuan, while the price of 6063 aluminum alloy profile per ton can reach 18,000-25,000 yuan, the cost gap is directly reflected in the price of the end product, and the overall price of galvanized sheet street lamps can be reduced by 20%-40%, which is more suitable for municipal projects with limited budgets or markets in developing countries.
(2) The processing technology is simple, and the mass production cost is controllable
Galvanized sheet can be formed by traditional processes such as stamping and welding, with low equipment input cost and high production efficiency (for example, the average daily production capacity of the assembly line can reach 2-3 times that of aluminum alloy). Aluminum alloys, on the other hand, require extrusion or die-casting processes, which have high tooling costs (5-10 times that of galvanized sheets for a single set of molds) and are difficult to process complex structural parts, resulting in a surge in costs for low-volume production.

2. Structural strength: more suitable for heavy loads and harsh environments
(1) Stronger impact resistance and wind load resistance
The tensile strength of galvanized sheet (375-500MPa) is higher than that of most aluminum alloy profiles (6063 aluminum alloy tensile strength is about 190MPa), especially suitable for coastal typhoon areas or windy and sandy areas. For example, a 1.5mm thick galvanized sheet light pole can withstand a wind speed of 40m/s (a 14-level typhoon), while an aluminum alloy pole of the same thickness needs to be increased to more than 2.5mm to achieve the same strength, resulting in an increase in cost.
(2) Outstanding vibration resistance and deformation resistance
In areas with frequent traffic or geological instability (such as next to highways and railways), the rigid structure of galvanized sheet street lamps is less prone to loose connectors or bending of rods due to long-term vibration, while aluminum alloy has a low elastic modulus (about 70GPa, 210GPa for galvanized steel), and long-term vibration may lead to wear of bolt holes and affect stability.

3. Corrosion resistance: a long-term advantage in specific scenarios
(1) Electrochemical protection characteristics of hot-dip galvanized layer
The zinc layer (thickness ≥ 85 μm) on the surface of the galvanized sheet preferentially oxidizes in a humid environment to form a protective layer of zinc oxide, which prevents rusting of the steel sheet through the principle of "sacrificial anode" even if the coating is partially damaged. For example, galvanized sheet street lamps can last up to 15-20 years in industrial contaminated areas or coastal high salt spray environments, while untreated aluminium street lamps may have surface chalking within 5-8 years due to galvanic corrosion (reaction of aluminium alloys with chloride ions in the air).
(2) Lower maintenance costs
After the galvanized layer is damaged, it can be repaired by repainting zinc paint, which is about 1/3 of the cost of aluminum alloy surface treatment (such as anodizing repair). However, if the oxide film of the aluminum alloy is damaged, it needs to be re-anodized as a whole, which is expensive and complicated.

4. Recycling and environmental protection characteristics
(1) Higher metal recovery
The steel of galvanized sheet can be 100% recycled and remelted, and the energy consumption of the recycling process is only 1/5 of that of aluminum alloy (about 2.5MJ/kg for steel recycling and 12MJ/kg for aluminum alloy). For the environmentally conscious European and American markets, galvanized sheet street lamps are more likely to pass ISO 14001 certification and meet green procurement standards.
(2) The cost of disposal is lower
The anodized film or spray coating on the surface of the aluminum alloy may release harmful gases during incineration, while the zinc layer combustion product of galvanized sheet is zinc oxide, which is less toxic and more in line with the requirements of environmental protection regulations.

Shenzhen UNIKE Technology Limited is a high-tech manufacturer of LED lighting products, integrated with R&D, production and sales in one. UNIKE focuses on lighting solution of both outdoor and indoor (mainly produces LED street light, LED floodlight, LED high bay light), insists on high efficiency, green energy, and environment friendly, aims to be the pioneer of energy-saving lamps in the new era.

UNIKE led products have obtained all kinds of domestic and foreign authority certification, such as CE, RoHS, FCC, TUV, ETL, CETL, DLC etc., are widely used on street, tunnel, bridges, wharf, billboards, landscape, architecture, city lightening, warehouse, workshop, shopping mall, etc., and exported a lot to North America, Europe and others such as Australia, New Zealand, Japan, Korea, and Southeast Asian countries. UNIKE is deeply recognized and favored by customers from all over the world.

Our engineers have more than 10 years of LED experience and our reliable sales team will provide high quality technical products and services to ensure you an enjoyable business experience.

Our success is determined by the satisfaction and confidence of our customers in what we do and how well we do it.