High-Temperature Aging Detection Equipment with Multi-Zone Heating and Forced Hot Air Circulation

Equipment Description

I. Heating and Temperature Control System
1. Heating Elements
Silicon Carbon Rods/Heating Tubes: Utilize high-temperature-resistant silicon carbon rods or honeycomb stainless steel heating tubes, enabling rapid temperature increases (0–30°C/min) up to 1600°C and offering a long service life.
Multi-Zone Heating: Heating elements are symmetrically arranged on both sides of the furnace, combined with a forced hot air circulation system to ensure temperature uniformity (no-load temperature difference ≤ ±2°C).
2. Control System
Temperature Control Module: Integrated with PLC and PID algorithms, supports multi-stage programmable temperature control (50 programmable steps), with a temperature accuracy of ±0.5°C and real-time display of temperature curves and operating status.
Safety Protection: Automatic over-temperature shutdown, leakage protection, heating element overload protection, and fault alarms ensure stable equipment operation.

II. Key Performance Parameters

III. Operation and Maintenance Specifications
1. Usage Procedure
Preheating: For the first use, run the furnace unloaded for one hour (at 300°C) to remove moisture and impurities.
Loading: Place the sample in a high-temperature resistant crucible or tray, avoiding direct contact with the furnace chamber. The furnace door must be completely sealed.
Cooling: After the program is complete, allow the furnace to cool naturally or activate the forced air cooling system. Open the furnace and remove the sample when the temperature drops below 100°C.
2. Maintenance Points
Cleaning: Regularly clean the furnace chamber to prevent carbon deposits that affect heating efficiency.
Inspection: Quarterly inspect the thermocouple calibration, heating element connection status, and electrical circuit insulation.

IV. Safety and Design Advantages
1. Safety Design
Explosion-proof Structure: Equipped with a pressure relief valve and flame arrester, suitable for flammable and explosive working conditions.
Multiple Protections: Independent over-temperature protection, over-current protection, and door open/close sensor shutdown. ‌2. Energy-Saving Features‌
The waste heat recovery system can use exhaust heat for preheating fresh air or auxiliary heating, achieving an overall energy saving rate of ≥40%.

Main structures and components:

I. Main Structure
1. Shell and Frame
Material: Double-layer cold-rolled steel or 304 stainless steel, finished with a high-temperature paint or rust-proof finish. Corrosion-resistant and heat-resistant up to 300°C.
Support Design: The frame is welded and equipped with heavy-duty casters or adjustable feet for easy mobility and securement.
2. Inner Chamber and Insulation
Heating Chamber: Alumina fiber or ceramic fiber chamber, heat-resistant up to 1600°C, with strong thermal shock resistance to prevent deformation.
Insulation Filling: High-density rock wool or ceramic fiber (thickness ≥ 100mm) is filled between the double-layer shell, achieving a heat dissipation rate of ≤5%.
3. Door Design
Sealed Door: Side-opening double-layer door with built-in high-temperature silicone sealing strips and explosion-proof locks to minimize heat dissipation and ensure safe operation.

II. Core Components
1. Heating System
Heating Elements: Silicon carbon rods, silicon molybdenum rods, or honeycomb stainless steel electric heating tubes, supporting rapid temperature increases (0–30°C/min) and reaching a maximum temperature of 1600°C.
Thermal Cycling Device: A high-temperature-resistant motor drives a multi-blade impeller, combined with symmetrically distributed heating elements, to ensure temperature uniformity within the furnace (no-load temperature difference ≤ ±2°C).
2. Temperature Control System
Control Module: Integrated PLC and PID algorithm, supporting multi-stage programmable temperature control (50 programmable steps) with a temperature accuracy of ±0.5°C.
Monitoring Interface: A touchscreen displays real-time temperature curves, operating status, and fault codes.
3. Safety Protection Components
Electrical Protection: Automatic over-temperature shutoff, leakage protection, and heating element overload protection.
Mechanical Protection: Explosion-proof pressure relief valve and door opening/closing sensor shutdown function, suitable for flammable and explosive working conditions. ‌

III. Auxiliary Components‌
‌Ventilation System‌: Built-in forced air cooling device supports rapid cooling (activates after the program ends).
‌Support Structure‌: High-temperature resistant crucible rack or tray support, adaptable to workpieces of different sizes.

‌IV. Comparison of Key Component Technical Parameters‌

Features:

1.High cost performance: Based on the customer's product positioning and development strategy, and with economic affordability as the foundation, we achieve the best cost performance.
2.The advanced and meticulous design concept of the equipment, along with the highly automated industrial equipment, showcases the image of a modern and advanced enterprise.
3. It has high adaptability, meeting the current production requirements and reserving room for development, taking into account the needs of increased production and improved quality in the future.
4.Quality compliance strictly adheres to the ISO900 quality management system, with every minute detail of the entire equipment installation being strictly controlled.

Domestic large-scale coating equipment, intelligent equipment, and environmental protection equipment production enterprises-Zhejiang Huier Coating Environmental Protection Equipment Co., Ltd has 37 years of experience industry team in the powder coating equipment,intelligent equipment and environmental protection equipment.It is the national high and new tech enterprise,Specialized, refined, and innovative small and medium-sized enterprises， scientific and technological SMES 27years specialized R&D, design, manufacture, installation, commissioning ,maintenance of varies coating equipment, automatic equipment, intelligent control system, waste water,waste gas environmental protection equipment and treatment engineering.The company is located in Wukang Street, Deqing County, covers an area of 30,000 square meters, workshop of more than 20,000 square meters, more than 200 employees. The company has passed ISO9001 international system certification, ISO14001 environmental management system certification and ISO45001:2018 Occupational health and safety management system certification, and obtained more than 40 national patents.

The company actively and constantly introduce excellent talents, focus on the development of coating equipment and environmental protection equipment of new technology, new process and new products every year.It is the mission of all staff to continuously develop and grow, meet the needs of customers and create value for customers.

The products are used in all kinds of metal surface, plastic, aerospace, auto parts, mechanical equipment, furniture and other surface treatment.It will meet the customer needs, because it adopts automatic production to anti-corrosion and powder coating the user's products,coating solid bright.

In aerospace, household appliances, light industry, furniture, machine tools, construction, motorcycles, automobiles, communications, aluminum, electric power, agricultural machinery and transportation and other industries by the user's praise. The company continue to innovate, research and development of new products, design and manufacture safety, energy saving, environmental protection, intelligent features of fire-proof safe, powder coating environmental protection equipment and intelligent equipment engineering projects.

The company not only meet the needs of domestic customers, but also in Southeast Asia, the Middle East, Europe, North America, South America and other 27 countries occupied the market has won the favor of customers! The company always dedicated to our customers with the overall intelligent coating environmental protection system solutions and system services.