30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification
Brand Name:DEYI
Model Number:DY-E730
Payment Terms:T/T
Place of Origin:Hunan, China
Packaging Details:56.7g/pcs; 24pcs/small box; 288pcs/big cartons
Supply Ability:500000 Piece/Pieces per Month
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Hunan China
Address:
No. 518, Group 5 Daming Village Daming Industrial Area of Jinxia Economic Development Zone, Changsha, Hunan, 410005, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
30 Minutes Epoxy Resin Adhesive For Black And White Bonding
Classification Other Adhesives
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil.
Non-flammable, non-shrinking and waterproof. Makes metallic grey
finish. Can be filed, grinded and drilled.
Technical Parameters
Color | Viscosity (CPS/25℃) | Mixture | Work Time(25℃/100g) | Cure Time (25℃/100g) | Lap Shear Strength (St-St) | Heat Resistance (℃) | Shelf Life (25℃) |
A:black | A:>100000 | 1:1 | 20 Minutes | Touch Dry: 30 Mins | ≥16 Mpa | -60 to +100 | 12 months |
B:milky white | B:>100000 | Full Cure: 24 hrs |
Products Description
STORAGE&WARNINGS
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
DERECTIONS
* Clear the contaminants like water, dusts, oil of the substrate
surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification
Inquiry Cart
0