3Hrs 5kg High Temperature Resistance Phenolic Epoxy resin Adhesive for Structural
Brand Name:DEYI
Model Number:DY-E705
Payment Terms:T/T
Place of Origin:Hunan, China
Supply Ability:1500000 Pair/Pairs per Week
CAS No.:61788-97-4
Contact Now
Add to Cart
Verified Supplier
Location:
Changsha Hunan China
Address:
No. 518, Group 5 Daming Village Daming Industrial Area of Jinxia Economic Development Zone, Changsha, Hunan, 410005, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
3hours 5kg high temperature resistance structural adhesive epoxy
adhesive
Details Images
1. Properties
4-MIN EPOXY ADHESIVE is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength.
Bonds to all metal, plastic, rubber, wood, ceramics, glass and concrete. Resistant to acid, alkali, and oil. Non-flammable,
non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
4-MIN EPOXY ADHESIVE is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength.
Bonds to all metal, plastic, rubber, wood, ceramics, glass and concrete. Resistant to acid, alkali, and oil. Non-flammable,
non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
2. Applications
4-MIN EPOXY ADHESIVE is applicable to bonding and repairing machinery, electronics, automobiles, shipbuilding, chemical industry,
and handicrafts. It forms excellent self and inter-bonding to substances such as metals, rubbers, leathers, various kinds of plastics.
4-MIN EPOXY ADHESIVE is applicable to bonding and repairing machinery, electronics, automobiles, shipbuilding, chemical industry,
and handicrafts. It forms excellent self and inter-bonding to substances such as metals, rubbers, leathers, various kinds of plastics.
3. Directions
* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.
4. Storage & Warnings
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Color | Cured Color | Viscosity (CPS/25℃) | Mixing Ratio | Work Time(25℃/100g) | Cure Time (25℃/100g) | Lap Shear Strength (St-St) | Heat Resistance (℃) | Shelf Life (25℃ |
A:black | Light Black | A:>100000 | 1:1 | 5 Minutes | Touch Dry: 5-10 Mins | ≥16 MPa | -60 to +100 | 12 months |
B:milky white | B:>100000 | Full cure: 12 hrs |
3Hrs 5kg High Temperature Resistance Phenolic Epoxy resin Adhesive for Structural
Inquiry Cart
0