Anodized CNC Brass Parts CNC Machining Copper Bronze Brass CNC Milling Turning Parts
Brand Name:Zhongwei
Certification:ISO9001:2015-ISO13485:2016
Model Number:OEM-ODM
Minimum Order Quantity:1
Delivery Time:7-16 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan China
Address:
Dongguan, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Brass undergoes work hardening during processing, which is a phenomenon in which the strength and hardness of a material increase while the plasticity decreases after plastic deformation. Work hardening is beneficial to improving the strength of brass parts, but it may also cause the material to become brittle and difficult to process later. Here are some methods to treat work-hardened brass:
Annealing treatment:
Annealing is the process of heating work-hardened brass to a certain temperature, holding it for a period of time, and then slowly cooling it.
Annealing can eliminate work hardening, restore the plasticity and toughness of the material, and reduce hardness and strength.
Annealing temperatures are usually between 400°C and 650°C, depending on the composition of the brass.
Aging treatment:
Aging treatment is carried out after annealing, heating the brass to a lower temperature (usually between 200°C and 400°C), holding it for a period of time, and then cooling it.
Aging treatment can further increase the strength and hardness of brass while maintaining a certain plasticity and toughness.
Warm processing:
Processing at a temperature below the recrystallization temperature is called warm processing.
Warm processing can partially eliminate work hardening while maintaining high strength.
Shaping and Correction:
For work-hardened brass parts, the shape can be adjusted by cold shaping or correction, but this usually requires greater force and may cause the material to crack.
Use of Lubricants:
The use of lubricants during processing can reduce work hardening and improve the plasticity of the material.
The steps for processing work-hardened brass are generally as follows:
Cleaning: Before annealing, the brass parts need to be thoroughly cleaned to remove oil, lubricants and other contaminants.
Heating: The brass parts are placed in a furnace for heating to ensure uniform temperature.
Housing: After reaching the annealing temperature, hold it for a certain period of time so that the internal structure of the material changes.
Cooling: After the holding temperature is completed, the brass parts are slowly cooled to room temperature to avoid the generation of new internal stresses.
It should be noted that annealing and aging treatments will affect the color and surface quality of brass, and subsequent surface treatments may be required to restore the appearance. In addition, the temperature and time control during the treatment process are very critical and must be determined according to the specific brass alloy type and part requirements.
CNC Machined Parts Surface Treatment.
(1) Physical surface treatment: sandblasting, wire drawing, shot blasting, polishing, rolling, polishing, brushing, spraying,
painting, powder spraying, silk screen printing, pad printing, water transfer printing, electrophoresis, etc.
painting, powder spraying, silk screen printing, pad printing, water transfer printing, electrophoresis, etc.
(2) Chemical surface treatment: bluish blackening, phosphating, pickling, electroless plating, TD treatment, QPQ treatment, carburizing, nitriding, chemical oxidation, passivation, etc.
(3) Electrochemical surface treatment: anodic oxidation, hard anodic oxidation, electrolytic polishing, electroplating, etc.
(4) Modern surface treatment: chemical vapor deposition CVD, physical vapor deposition PVD, ion implantation, ion plating, laser surface treatment, etc.
Copper Parts Machining
Copper: Due to Its High Conductivity, Good Machinability, Copper Is an Ideal Material Choice in Cnc Machining. Material Selection: Brass, Phosphor Bronze, Nickel Silver, Bronze, Pure Copper.
FAQ
Delivery date?
Usually 20-35 days after receiving the deposit, the specific delivery date depends on the order quantity.
What are your payment terms?
Usually 30% deposit and 70% balance by T/T, Western Union, Paypay, other payment terms can also be discussed based on our cooperation.
How to control your quality?
We have a professional QC team to control the quality during mass production and conduct a full inspection of the goods before shipment.
If we don't have a freight forwarder in China, will you do it for us?
We can provide you with the best transportation route to ensure that you can receive the goods in time with the best price.
Can you send me a sample?
Yes, we can send you a sample to check our quality, you need to pay the sample fee, we will return it to you once you place an order with us, this is to show the sincerity of business cooperation, and this is also the regulation of our company.
Anodized CNC Brass Parts CNC Machining Copper Bronze Brass CNC Milling Turning Parts
Inquiry Cart
0