Manifold Hydraulic Valve Block Hydraulic Motor Cushion Valve For Rotary Excavator
Brand Name:Zhongwei
Certification:ISO9001:2015, ISO13485:2016
Model Number:OEM-134
Minimum Order Quantity:1
Delivery Time:7-13 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan China
Address:
Dongguan, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
Manifold Hydraulic Valve Block Hydraulic Motor Cushion Valve For
Rotary Excavator
The design of hydraulic valve block is mostly non-standard design,
which needs to be conducted according to different working
conditions and use requirements
The design of valve block is divided into the following steps: material selection, design, processing and heat treatment, deburring and
Cleaning, surface anti-rust treatment and test.
Different materials determine different pressure levels. First, select materials reasonably according to the service pressure. Generally
The following principles shall be followed:
When the working pressure P<6.3MPa, the hydraulic valve block can be cast iron HT20-40. Cast iron can be used
In order to carry out mass casting, reduce working hours and improve efficiency, especially suitable for standardized valve blocks.
When 6.3MPa ≤ P<21MPa, the hydraulic valve block can be aluminum alloy forgings, No. 20 forged steel or Q235;
Low carbon steel has good welding performance, especially suitable for non-standard hard pipes (many valve blocks need to be welded with hard pipes in use
Connect).
When P ≥ 21MPa, the hydraulic valve block can be made of 35 # forged steel. Direct machining or machining after forging
Post quenching and tempering HB200-240 (general high-pressure valve blocks are often subject to flaw detection, machining and heat treatment cycles.
The design of valve block is divided into the following steps: material selection, design, processing and heat treatment, deburring and
Cleaning, surface anti-rust treatment and test.
Different materials determine different pressure levels. First, select materials reasonably according to the service pressure. Generally
The following principles shall be followed:
When the working pressure P<6.3MPa, the hydraulic valve block can be cast iron HT20-40. Cast iron can be used
In order to carry out mass casting, reduce working hours and improve efficiency, especially suitable for standardized valve blocks.
When 6.3MPa ≤ P<21MPa, the hydraulic valve block can be aluminum alloy forgings, No. 20 forged steel or Q235;
Low carbon steel has good welding performance, especially suitable for non-standard hard pipes (many valve blocks need to be welded with hard pipes in use
Connect).
When P ≥ 21MPa, the hydraulic valve block can be made of 35 # forged steel. Direct machining or machining after forging
Post quenching and tempering HB200-240 (general high-pressure valve blocks are often subject to flaw detection, machining and heat treatment cycles.
Manifold Hydraulic Valve Block Hydraulic Motor Cushion Valve For Rotary Excavator
Inquiry Cart
0