Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Brand Name:SINOMEMB
Certification:NSF
Model Number:SNU-HO-2-T865
Minimum Order Quantity:1
Packaging Details:Standard export packaging
Supply Ability:1500000 Piece/Pieces per Month
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
1305, Block B, Zhongtiejian Plaza, Beijing, China
Supplier`s last login times:
within 24 hours
Product Details
Company Profile
Product Details
The core SINOMEMB ® series SN U-HO- 2880 hollow fiber UF membrane element is suitable for systems
with a capacity of more than 50 m 3 /hr (220gpm) . Longer module
length, larger effective membrane area, and
higher packing density make it the module with the highest
effective membrane area among SINOMEMB® series
UF modules , which can be widely used in surface water, well water,
seawater , industrial wastewater and sewage
secondary , tertiary treatment and other water treatment
applications .
Ø Membrane element specifications
| Membrane element model | Effective membrane area ft 2 (m 2 ) | Effective volume G( L ) | weight empty /full of water ( kg ) |
| SN U-HO-2- T 880 | 862(80) | 11(42) | 70/105 |
| Inlet size | Water outlet size | Concentrated water outlet size | Membrane Polymer |
| DN50 | DN50 | DN50 | PVDF |
| Membrane inner diameter/outer diameter (mm) | Filtration precision (μ m ) | shell material | Sealant material |
| 0.7/1.3 | 0.03 | U-PVC | epoxy resin |
Ø Membrane element operating parameters
| Filtration flux ( 25℃ ) L/㎡·hr | 40-90 |
| Flow range ( 25℃ ) m³/hr | 3.2-7.2 |
| Maximum influent turbidity (NTU) | ≤100 |
| Maximum resistance to residual chlorine (NaCLO) (ppm) | Continuous: 200; Momentary: 5000 |
| Maximum anti-suspended solid capacity (ppm) | ≤100 |
| Maximum influent COD (ppm) | 100 |
| Working temperature (℃) | 15-40 |
| pH range | 2-12 |
| Maximum water production (L/m³·h) | 150 |
| Maximum water inlet pressure ( 20°C ) (Mpa) | 0.3 |
| Maximum transmembrane pressure difference (Mpa) | 0.2 |
| Maximum backwash pressure (Mpa) | 0.25 |
| Maximum air flushing flow rate (Nm³/hr) | 10-18 |
| General backwash cycle (min) | 15-60 |
| General backwash time (sec) | 30-60 |
| General backwash flow rate (L/m³·h) | 180-320 |
| General chemical enhanced backwash cycle (day) | 1-15 |
| General chemical backwashing time (min) | 1-15 |
| General chemical cleaning cycle (day) | 30-180 |
| General chemical cleaning time (min) | 90-480 |
| General chemical cleaning chemicals | NaClO or H2O2 20 00ppm , NaOH (PH≤10), HCl ( PH≥2 ) |
| How to run /operate | outside-in / full flow or cross flow filtration |
| Expected water production SDI | ≤3 |
| Expected product water turbidity NTU | ≤0.1 |
| Bacteria removal rate (log) | >3 |
| E. coli removal rate (log) | >6 |
| service life | ≥3 years under standard conditions |
Ø Membrane element size
| L | L1 | L2 | L3 | L4 | Diameter Φ | air intake |
| 2360mm | 2000mm | 2130mm | 2320mm | 180mm | 225mm | RP 3/8” |
| (92.9)in | (78.7)in | (83.9)in | (91.3)in | (7.1)in | (8.9)in | / |
Membrane element operation guide
During the operation of the UF system, it is necessary to avoid
sudden changes in pressure during system
start-up, shutdown, operation, cleaning, maintenance, etc., as well
as exceeding the maximum withstand pressure
specified in this manual, to prevent possible membrane breakage,
sealing, etc. End fall off, membrane shell
cracking and other serious damage consequences; this series of
products have been treated with anti-corrosion and
membrane wire protection before leaving the factory, and the inner
membrane wire of the module is in a semi-dry
state. For manual operation, the water production rate should be
set to 50% of the design water production rate, and
the initial water production must be discharged directly and cannot
be used as product water.
Membrane element product usage tips
The normal start-up and normal cleaning and maintenance of the UF
system are the key to ensure the long-term
normal use of membrane products. Before starting the system, it
should be ensured that the parameters of each
valve, instrument, pre-processing equipment, signal transmission
equipment, power equipment, etc. meet the design
specifications and requirements, so as to ensure the safe, stable
and up-to-standard operation of the overall system.
Please refer to the product technical manual for the debugging and
testing work of the system in the early stage.
Disclaimer
Failure to operate in strict accordance with the operating limits
and guidelines set forth herein voids our limited
warranty. If the UF system is out of service, please inject
protective liquid inside the membrane module for
anti-corrosion treatment, so as to avoid the increase of
maintenance cost caused by the large number of
microorganisms in the system.
Products Description
product name | Industrial Ultrafiltration Membrane |
Model | UF-2880 |
Product Size | 2360*180mm |
Working type | out-inside |
material | PVDF |
CBM | 0.28 |
G.W(kgs) | 38.0 |
N.W(kgs) | 35.0 |
main effect | water purification system |
apply to | Residential reverse osmosis membrane |
Q:How is SINOMEMB membrane different from others? A:We offer value
against your money, prices which are comparatively lower,
performance equivalent to best membranes available and with higher
longevity. Q:Are you a manufacturer? A.Yes,we have been in
providing the professional products in wire mesh field for more
than 10 years. Q:How about the delivery time? A:Usually
within7-10days,customized order may need longer time.
Longer Module Length SINOMEMB reg SN U-HO-2880 Ultrafiltration Membrane for Water Treatment Applications
Inquiry Cart
0