
Add to Cart
| Cable Type | UTP |
| Category | CAT6A |
| Conductor Material | Copper |
| Conductor Size | 23 AWG |
| Jacket Material | LSZH |
| Jacket Color | White |
| Frequency | 500 MHz |
| Length | 500FT |
| Product Description: Wholesale Bulk UTP CAT6A LSZH CPR B2ca-s1a,d1,a1 Ethernet Cable for Network Deployments | |
| Rev.:A | ECN Description: |
| Construction Item Description | Electrical Properties | |||||
Conductor | Material | Oxygen-Free Bare Solid Copper | Single Conductor DC Resistance,Max,20℃ | 9.5Ω/100m | ||
| Elongation | ≥15% | Conductor DC Resistance Imbalance,Max,20℃ | ≤2% | |||
| OD | 23AWG | Pairs DC Resistance Imbalance,Max,20℃ | ≤4% | |||
Insulation | Material | HDPE 8303 | Delay Skew,1-250MHz,Max | 45ns/100m | ||
| OD | 1.01±0.02 | Velocity of Propagation | 69% | |||
| Average THK | 0.21mm | Insulation Resistance(CD/CD),DC100-500V,Min | 5000MΩ.km | |||
Color | 1p: white + 2 blue stripes & blue | Pair To Ground Capacitance Unbalance,Max,0.8KHz∕1KHz | 160pF/100m | |||
2p: white + 2 orange stripes & orange | Dielectric Strength(CD/CD):2.5KV DC for 2 seconds or 1KV DC for 1 minute | No Breakdown | ||||
3p: white + 2 green stripes & green | Mechanical Property | |||||
4p: white + 2 brown stripes & brown | insulation | elongation before aging | ≥ 300% | |||
Pair Twist | Lay&Direction | 1p:S=15.5mm(26%) | tensile strength before aging | ≥16 MPa | ||
| 2p:S=11.0mm(19%) | jacket | elongation before aging | ≥ 150 % | |||
| 3p:S=14.0mm(24%) | tensile strength before aging | ≥10.5 MPa | ||||
| 4p:S=12.5mm(21%) | elongation after aging | ≥ 125 % | ||||
Inner Assemble | Lay | S=90±5mm | tensile strength after aging | ≥ 10 MPa | ||
| Direction | according to the drawing | Packing | ||||
| Filler | 5.0±0.1mm x 0.5±0.01mm | |||||
| OD | / | Drum | NA | |||
Filler | Material | Ripcord | ||||
| Construction | 300D | |||||
Outside Shield | Shield | / | ||||
| Construction | / | |||||
| Material | / | |||||
| Coverage | / | |||||
Jacket | Material | LSZH | ||||
| Hardness | 81A±3A | |||||
| OD | 7.0±0.5mm | |||||
| Average THK | 0.7mm+Gear | |||||
| Color | according to the customer's requirements | |||||
| Marking Color | according to the customer's requirements | |||||
| Marking | according to the customer's requirements | |||||
| Electrical Properties | ||
| Single Conductor DC Resistance,Max,20℃(Ω/100m) | NF EN 50289 | 9.5 |
| Conductor DC Resistance Imbalance,Max,20℃(%) | ≤2 | |
| Pairs DC Resistance Imbalance,Max,20℃(%) | ≤4 | |
Dielectric Strength Conductor/Conductor:2.5KV DC for 2 seconds or 1KV DC for 1 minute | No Breakdown | |
Insulation Resistance Insulation Resistance(Conductor/Conductor),DC100-500V,Min(MΩ.km) | 5000 | |
| Pair To Ground Capacitance Unbalance,Max,0.8KHz∕1KHz(pF/100m) | 160 | |
| Delay Skew,1-250MHz,Max(ns/100m) | 45 | |
| Velocity of Propagation(%) | 69 | |
Freq | Characteristic Impedance Upper Limit | Characteristic Impedance Lower Limit | RL | ATT | NEXT | PS NEXT | EL FEXT | PS ELFEXT | Propagation Delay |
| MHz | Ω | Ω | dB | dB/100m | dB/100m | dB/100m | dB/100m | dB/100m | ns/100m |
| 4 | 115.2 | 86.8 | ≥23 | ≤3.8 | ≥66.3 | ≥63.3 | ≥56 | ≥53 | ≤552 |
| 8 | 112.6 | 88.8 | ≥24.5 | ≤5.3 | ≥61.8 | ≥58.8 | ≥49.9 | ≥46.9 | ≤547 |
| 10 | 111.9 | 89.4 | ≥25 | ≤5.9 | ≥60.3 | ≥57.3 | ≥48 | ≥45 | ≤545 |
| 16 | 111.9 | 89.4 | ≥25 | ≤7.5 | ≥57.2 | ≥54.2 | ≥43.9 | ≥40.9 | ≤543 |
| 20 | 111.9 | 89.4 | ≥25 | ≤8.4 | ≥55.8 | ≥52.8 | ≥42 | ≥39 | ≤542 |
| 25 | 112.9 | 88.5 | ≥24.3 | ≤9.4 | ≥54.3 | ≥51.3 | ≥40 | ≥37 | ≤541 |
| 31.25 | 114.1 | 87.7 | ≥23.6 | ≤10.5 | ≥52.9 | ≥49.9 | ≥38.1 | ≥35.1 | ≤540 |
| 62.5 | 118.3 | 84.5 | ≥21.5 | ≤15 | ≥48.4 | ≥45.4 | ≥32.1 | ≥29.1 | ≤539 |
| 100 | 121.9 | 82 | ≥20.1 | ≤19.1 | ≥45.3 | ≥42.3 | ≥28 | ≥25 | ≤538 |
| 200 | 128.8 | 77.6 | ≥18 | ≤27.6 | ≥40.8 | ≥37.8 | ≥22 | ≥19 | ≤537 |
| 250 | 131.6 | 76 | ≥17.3 | ≤31.1 | ≥39.3 | ≥36.3 | ≥20 | ≥17 | ≤536 |
| 300 | 133.7 | 74.7 | ≥17.3 | ≤34.3 | ≥38.1 | ≥35.1 | ≥18.5 | ≥15.5 | ≤536 |
| 400 | 138.2 | 72.4 | ≥17.3 | ≤40.1 | ≥36.3 | ≥33.3 | ≥16 | ≥13 | ≤536 |
| 500 | 142 | 70.4 | ≥17.3 | ≤45.3 | ≥34.8 | ≥31.8 | ≥14 | ≥11 | ≤536 |
Q: What is the brand name of this UTP CAT6A cable?
A: The brand name is ITI-LINK.
Q: What is the model number of this UTP CAT6A cable?
A: The model number is ITI-C6AU-11.
Q: Where is this UTP CAT6A cable made?
A: This cable is manufactured in SHENZHEN.
Q: What is the maximum data transfer rate supported by this UTP CAT6A cable?
A: This cable supports data transfer rates of up to 10 Gbps.
Q: Is this UTP CAT6A cable suitable for outdoor use?
A: No, this cable is not suitable for outdoor use as it is not designed to withstand exposure to the elements.