

Add to Cart
Specification
I. Product Overview
S1312SE wireless door touch remote control switch adopts 2.4GHz
wireless RF control mode, which can be matched with our control box
to realize wireless control function of lamps and lanterns.
Adopting replaceable CR2450 button battery, the wireless control
box can control 10M distance in the open occasion. The appearance
is neat and elegant, light and beautiful; using advanced low-power
chip, long standby time; this product has the advantages of
environmental protection and energy saving, easy to use, no wiring,
etc. It is an excellent solution for furniture LED lighting
control.
II. Wireless remote control technical parameters
Ambient temperature | -20℃~50℃ | Operating Voltage | 3.0~3.3V | |
Battery type | CR2450 | Modulation method | GFSK | |
Standby power consumption | <0.2mW | Operating power consumption | <60mW | |
Wireless transmitting frequency | 2.4GHz | Remote Control Distance | 10M | |
Door touch sensing distance | 1-3cm | Product Size | 50*40*11.5*mm |
III. Product dimensional drawing and wood panel processing drawing
IV. Wireless switch code pairing, code clearing and learning operation
Pair code method:
Connect the luminaire with smart power supply or control box and then power on the device. Within 30S, press and hold the code key of the remote control, when the luminaire will flash 3 times, it means the code is successful and the remote control can control this group of luminaire.
Clear code mode:
5S before the receiver is powered on, press the code key and clear code key at the same time for about 5S, the light flashes 3 times, then the clear code is successful; the remote control can no longer control this receiver.