

Add to Cart
This is an industrial desalination unit, which is usually used to
convert seawater into fresh water. According to the information you
provided, the desalination unit has a processing capacity of 6
tons, which means that it can process 6 tons of seawater per day.
The dimensions of the unit are 171 cm high, 111 cm wide, and 62 cm
long, which is suitable for use in industrial environments or large
ships. The working principle of a desalination unit usually
includes the following steps:
1. Pretreatment: Remove larger particles such as sand, algae, etc.
from seawater.
2. Reverse osmosis (RO): Pass seawater through a semi-permeable
membrane under high pressure, allowing only water molecules to pass
through, while salt and other impurities are blocked.
3. Post-treatment: Further treatment of the water after reverse
osmosis, such as disinfection, is performed to ensure that the
water quality meets drinking water standards.
4. Energy recovery: Some systems recover the energy generated
during the reverse osmosis process to improve efficiency. This
equipment is very important for coastal areas, islands, or ships
because they can provide a reliable source of fresh water. If you
need more detailed information or operation and maintenance
guidance, please contact us for communication
Introduction:
Today, as water resources are increasingly scarce, [Dongguan
Jingchuang Environmental Protection Equipment Co., Ltd.] is
committed to turning the vast ocean into a source of life and
providing clean and safe drinking water to the world.
Seawater desalination equipment Ship island filtration drinking water water purifier subsea water filtration system
Commercial Seawater RO membrane filtration water treatment Plant is
used to remove salt and purify water. This system consists of
booster pump, FRP/Carbon Steel pretreatment tanks (sand filter,
activated carbon filter), cartridge filter housing, chemical dosing
systems, high pressure pump, FRP membrane pressure vessel, 2540 or
4040 membranes, control panel and touch screen control.
Material and parts brand can be changes as regards to raw water
quality and customer demand.