

Add to Cart
This is an industrial-grade water treatment system, usually used for commercial or industrial purposes to provide high-quality pure water
The following is a detailed introduction to the system:
1. Pretreatment unit: The transparent cylindrical water tank on the
left side of the system may be a pretreatment unit, which is used
to initially filter large particles of impurities in the water,
such as silt, rust, etc.
2. Booster pump: The black pump body below the pretreatment unit is
a booster pump, which is used to increase water pressure to ensure
that the water can pass through the subsequent filtration and
purification unit.
3. Multi-stage filtration system: The multiple water tanks and
pipes in the system may represent a multi-stage filtration system,
including: • Activated carbon filter: removes residual chlorine,
odor and organic matter in the water. • Fine filter: further
removes smaller particles. • Reverse osmosis (RO) system: removes
dissolved salts, heavy metals, bacteria and viruses in the water
through a semi-permeable membrane to provide high-purity water.
4. Control panel: The control panel above the system contains
multiple buttons and indicators for monitoring and controlling the
entire water treatment process. The panel may include a power
switch, manual/automatic mode switch, alarm indicator, pressure
gauge, etc.
5. Water storage tank: The system may contain one or more water
storage tanks for storing purified water for use when needed.
6. Post-treatment unit: After the reverse osmosis system, there may
be a post-treatment unit, such as a UV sterilizer or mineralizer,
to further disinfect or adjust the water quality.
7. Pipes and valves: The pipes and valves in the system are used to
control the direction and pressure of the water flow to ensure that
the water can pass through each treatment unit according to the
predetermined process. This water treatment system is suitable for
occasions that require a large amount of pure water, such as
pharmaceutical factories, laboratories, food processing, electronic
manufacturing, etc. Through multi-stage filtration and reverse
osmosis technology, the water quality is guaranteed to meet strict
industrial standards.
Introduction:
Today, as water resources are increasingly scarce, [Dongguan
Jingchuang Environmental Protection Equipment Co., Ltd.] is
committed to turning the vast ocean into a source of life and providing clean and safe drinking water to the world.
Seawater desalination equipment Ship island filtration drinking water water purifier subsea water filtration system
Commercial Seawater RO membrane filtration water treatment Plant is used to remove salt and purify water. This system
consists of booster pump, FRP/Carbon Steel pretreatment tanks (sand filter, activated carbon filter), cartridge filter
housing, chemical dosing systems, high pressure pump, FRP membrane pressure vessel, 2540 or 4040 membranes, control panel
and touch screen control.
Material and parts brand can be changes as regards to raw water
quality and customer demand.
From touch screen panel, you can see all system flow diagram and
automatic or manual control the system.
Membranes do not allow small particles, virus, bacteria to pass as
a result your water becomes very clean and safe.
Note: Due to product specificity need to buy the pro please contact our customer service, customer service will be based
on the pro's water consumption and water quality problems to recommend the right products to the pro, in order to avoid
unnecessary future trouble please do not blindly buy equipment, such as the need for specific details of the
specifications and parameters or picture trouble pro contact customer service, we will answer the pro's questions, thank
you for the pro's support of the net environmental protection, thanks!