Product Details
80km Long Range Drone HDMI And SDI Video And Control Data
Transmitter For UAV
The IWAVE FMS-8480 is a high-performance wireless transmission
system designed for large drones (VTOL/fixed-wing), providing HDMI,
SDI, and IP video input alongside serial data downlink. It enables
full HD video streaming and MAVLINK flight control data
transmission over an 80km range without relying on ground
infrastructure.
Built on advanced TDD-COFDM technology, the FMS-8480 ensures high
throughput (up to 6Mbps)for video transmission while maintaining
exceptional signal stability in control channels—even at maximum
range.
FMS-8480 also integrated full duplex serial control data for flight and
gimbal contro at same time by pilot on ground.
Frequency Option
Key Features
- Video Transmission: Supports HDMI, SDI, and IP video inputs,
delivering full HD video quality.
- Data Downlink: Provides robust MAVLINK flight control data and
wireless communication for distances up to 80 km without the need
for additional infrastructure.
- Advanced Technology: Utilizes enhanced TDD-COFDM technology,
achieving high throughput of up to 6 Mbps for video and superior
reliability for control signals.
- Latency: End to end 50ms for 1080P30 video
- End to end 40ms for 720P60 video
- Up to 80km range (LoS )
- Lightweight : The onboard unit weighs only 250 grams (8.8 ounces),
making it suitable for various drone types including VTOL and
fixed-wing models.
- Flexible Connectivity: Easily connects through HDMI, SDI, or
Ethernet interfaces for video, with serial interfaces available for
control.
- 1*LAN Port: TCPIP/UDP
- 2* Serial Ports: Bi-directional Data Transmission
- 2* Antennas: Dual Tx antenna and Dual Rx antenna
Application:
- Surveillance: Provides real-time video feeds from drones, allowing for
effective monitoring of events and situations from the air.
- BVLOS Communications: Facilitates Beyond Visual Line of Sight (BVLOS) operations,
enabling drones to operate at extended ranges while maintaining
control and data transmission.
- it‘s an ideal for long-range surveillance, inspection, and command
operations, the FMS-8480 delivers reliable, low-latency video and control links for demanding UAV missions.
Specification
Frequency | 800Mhz: 806~826MHz |
1.4Ghz: 1428~1448MHz |
AntI-interference | Automatical Frequency Hopping |
Bandwidth | 8Mhz |
RF Power | 4Watts |
Range | 80km Air to ground |
Data Rate | 6Mbps (shared by video, Ethernet and serial data) The best video stream: 2.5Mbps |
Baud Rate | 115200 |
Rx Sensitivity | -104dbm |
Wireless Fault Tolerance Algorithm | Wireless baseband FEC forward error correction/video codec super
error correction |
Latency | Total Latency for encoding + transmitting + decoding 720P/60 <50 ms 720P/30 <40 ms 1080P/60 <80ms 1080P/30 <50ms |
Link Rebuild Time | <1s |
Modulation | Uplink QPSK/Downlink QPSK |
Video Compression Format | H.264 |
Video Color Space | 4:2:0 (Option 4:2:2) |
Encryption | AES128 |
Start Time | 15s |
Power | DC-12V (7~18V) |
Interface | Interfaces on Tx and Rx are same - 1*Video input/Output: Mini HDMI
- 1*Video input/Output: SMA(SDI)
- 1*Power Input Interface
- 2*Antenna Interface: SMA
- 2*Serial (TTL3.3V)
- 1*Ethernet(100Mbps)
|
Indicators | - Power
- Wireless Link Status Indicator
|
Power Consumption | |
Temperature | - Working: -40 ~+ 85℃
- Storage: -55 ~+100℃
|
Dimension | Tx/Rx: 93*93*25.8mm(not include SMA & Power plug) |
Weight | Tx/Rx: 250g |
Metal Case Design | CNC Craft |
Double Aluminum Alloy Shell |
Conductive Anodizing Craft |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |