Product Details
Secure Wireless UGV Data Links For NLOS Communications
Introduction
The FD-7800 radio leverages IWAVE's COFDM IP Mesh waveform,
delivering exceptional real-world coverage, unmatched throughput,
and robustness. IWAVE's proprietary waveform operates as a mobile
ad hoc network (MANET) and incorporates multiple features to
deliver superior performance in the most challenging environments.
The FD-7800 radio supports all waveform variants, enabling users to
mix and match across various form factors and power levels.
Each waveform is best suited for specific applications, from UGV
swarming to point-to-point links, and is interchangeable across all
IWAVE software-defined radios (SDRs). IWAVE offers one of the
broadest hardware product lines, ranging from the smallest,
lightest, and lowest-power OEM modules for micro-UAVs to rugged
radios ideal for maritime, ground vehicle, and control station
applications.
Frequency options range from 500MHz to 1.4GHz, with support for
combining bands to create tri-band products.
Each band typically offers 100MHz of frequency, one of the widest
frequency coverages in the industry. IWAVE IP MESH radios provide
self-forming, self-healing mesh networks, ranging from
point-to-point links with two radios to dynamic mesh networks with
up to 32 radios.
FD-7800 MiMo IP Mesh Core Module Key Features:
Powerful Performance in Ultra-Compact Design The FD-7800 IP MESH Core Module is engineered for cutting-edge
unmanned systems, delivering 2x2 MIMO MANET radio performance in an
ultra-low SWaP (Size, Weight, and Power) OEM package.
✔ Compact & High-Performance – Integrates C2, sensor/telemetry
data, and comms relay for seamless UGV communications ✔ Military-Grade Security – Advanced AES-128 encryption + fast
frequency hopping for anti-jamming resilience ✔ Battlefield-Proven – Maintains peak performance in complex,
contested RF environments ✔ Advanced LDPC Channel Coding – Superior anti-interference
performance ✔ Rapid Flexible Networking – Supports up to 32 nodes ✔ IP-Based PHY Layer Technology – Enables both unicast & broadcast
modes ✔ Intelligent Self-Organizing Network - Auto-selects optimal transmission routes
- Dynamically allocates channel bandwidth
- 1-3km NLOS (Non-Line-of-Sight) range per node+
✔ Multi-Platform Compatibility – Ideal for robotics, UAVs, USVs,
and unmanned systems | |
Key Features of Mesh Wireless Data Transmission Radio For Dynamic
Robotic Connectivity
Ad Hoc Digital Wireless Data Link System - Key Features: - SDR: Software Defined Radio, the world's smallest MIMO dual-band
mesh radio
- Maximum 40MHz Bandwidth: Utilizes LTE-A's CA technology (Carrier
Aggregation): Dual carriers support a maximum 40MHz operating
bandwidth (2 x 20MHz).
- Strong Interference Resilience: 600MHz (566-678MHz) and 1.4GHz
(1420-1530MHz) dual-band, totaling 222MHz, effectively avoids
interference.
- Frequency Hopping: Frequency hopping is performed based on RSRP,
SNR, and SER to select the optimal frequency.
100Mbps Throughput: 64 nodes share 100Mbps uplink and downlink
speeds. - Strong Non-Line-of-Sight Capabilities: Ground-to-ground
communication ranges up to 1-3 kilometers.
- 10km Communication Range: Air-to-ground LOS communication range
between aircraft and GCS is 10 kilometers.
|
Secure Wireless UGV Data Links For NLOS Communications | Easy Integration The design documentation in our self-service technical library
enables quick and easy product integration and helps engineers
maximize the features and functionality of the FD-7800 radio.
Documentation includes:
- Integration and Configuration Guides
- FD-7800 Radio and Antenna Datasheets
- Regulatory Certifications and Compliance Information
- Application and Release Notes, Evaluation Kit Documentation, White
Papers, and More
- API document and AT commands file
|
| FHSS(Frequency Hopping Spread Sprectrum)
Utilizing IWAVE's proprietary algorithms and mechanisms, the
FD-7800 internally calculates and evaluates the current link
quality based on factors such as RSRP, SNR, and SER. When
predefined thresholds are met, the system initiates frequency
hopping and selects the optimal frequency from a database.
Frequency hopping execution is entirely dependent on real-time
wireless conditions: 1. When link quality remains stable, no hopping occurs. 2. The system maintains the current frequency until handover
criteria are met.
|
Application
Various Interfaces
The rich interfaces enable users to connect various terminals. - Expansion Port: It is 20pin port for uses to define more interface
and single-chip microprocessor application, download port, power
port, etc. - RJ45 ports: users can connect the IP camera, sensors, onboard
microcomputers such as Linux/windows/Android... - Serial port: It can connect with PTZ, flight control such as
pixhawk - USB: It can be used for debugging and AT commands sending or
enumerate it as network port or AT command port.
| |
Specification
General | Wireless |
Technology | MESH Network based on IWAVE proprietary time slot frame structure &
waveform. | Communication | 1T1R1T2R2T2R |
Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication |
Data Rate | Max 100Mbps(Uplink and Downlink) | Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
Range | 1-3km Non-line-of-sight | Auto Reconnection | Automatic link re-establishment after link failure/ re-deploy the
network after a link failure |
Capacity | 32nodes | Sensitivity |
MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ |
Power | 23dBm±2 (2w, 5w or 10w on request) | 10MHZ |
Latency | End to end≤5ms-15ms | 5MHZ |
Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ |
Anti-jam | FHSS(Frequency Hop Spread Spectrum) | 10MHZ |
Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ |
Power Consumption | 5Watts | Dual Frequency Band |
Power Input | DC5-32V | 1.4Ghz | 1420Mhz-1530MHz |
Dimension and Weight | 71*60*10mm/33g | 600Mhz | 566Mhz-678Mhz |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |