Product Details
Bi-directional Data Link For Drones And Robotics
Introduction
Advanced UGV Communication Solution for Remote Operations in
Complex Environments
FDM-6800 provides robust video and control channels for drones and
robotics in Non-line-of-sight (NLOS) conditions.
FDM-6800 is based on enhanced IP star network technology and IWAVE
special high spectral efficiency waveform. This unique feature
gives FDM-6800 an ability to support high throughput up to 120Mbps
in the video channel and superior robustness in the control
channel.
Video channel can be easily connected through the Ethernet
interface. Ethernet, RS232/RS485 or TTL interfaces can be used for
the control channel.
FDM-6800 supports point-to-point and point-to-multipoint network
topologies. For high robustness, it is equipped with algorithms for
suppression of narrowband and pulse interference. FDM-6800 supports
also such interesting features as an adaptive transmission power
control, TX-RX range estimation and IPv4 frames routing.
Key Features
●2x2 MIMO Technology: Stronger signal & stable connections ●5W High Power Output: long communication distance and strong
penetration ability. ●AES128 Encryption: Security wireless link to prevent unauthorized
access ●100-120Mbps Speed: Enable full HD video streamning transmission ●64-Node Network: 1 master controls 64 slave devices ●1-3km NLOS Range: Reliable ground-to-ground, non-line-of-sight ●P2P & P2MP Modes: Flexible networking options for one UGV or
robotic swarms application. ●Dual-Band (600MHz/1.4GHz) – Software-selectable frequencies ●Strong Anti-jamming Ability – Multi-band sensing & fast hopping
(300+ hops/sec) ●Ultra-Compact Design: 12.7×9.4×1.8cm, 281g | |
Dual-Band 600MHz & 1.4GHz Selectable Radio
IWAVE’s Star Network Technology enables seamless multi-band,
multi-channel coordination in a single device. Switch effortlessly
between L-band (1.4GHz) and UHF (600MHz) via software for superior
penetration & anti-interference.
✔ Ultra-wide frequency selection: 1420–1530MHz & 566–678MHz
✔ Easy frequency switching: Instantly toggle between 600MHz &
1.4GHz with management software
✔ Enhanced reliability: Optimized for challenging environments
Anti-jamming: FHSS(Frequency Hopping Spread Sprectrum)
FDM-6800 adopts IWAVE team’s speical algorithm and mechanism to
achieve frequency hopping function. During working, FDM-6800 will
internally calculate and evaluate the current link based on factors
such as received signal strength RSRP, signal-to-noise ratio SNR,
and bit error rate SER. If its judgment condition is met, it will
perform frequency hopping and Select an optimal frequency point
from the list. Whether to perform frequency hopping depends on the
wireless state. If the wireless state is good, frequency hopping
will not be performed until the judgment condition is met.
| Easy Network Management Simplify control with iWAVE’s intuitive management software—monitor
nodes, track real-time topology, and optimize performance
effortlessly. ✔ Live network insights: View dynamic SNR, RSSI, and node distances ✔ Full remote control: Adjust frequency bands, toggle FHSS, and
modify IPs ✔ Seamless integration: API support for third-party unmanned
platforms ✔ Advanced AT commands: Configure keys, frequency, bandwidth, and
check firmware Smart, scalable, and easy to manage—power your network with
precision.
Seamless Integration | iWAVE FDM-6800 UGV Datalink Easily integrate long-range, high-bandwidth wireless connectivity
into robotics and unmanned systems with iWAVE’s API, AT commands,
3D files, and expert support. ✔ Plug-and-play robotics integration – Ready for advanced
autonomous applications ✔ Single-radio convoy & swarm solution – Connect manned & unmanned
systems ✔ Full developer resources – API docs, AT commands, and 3D design
files ✔ Battle-tested UGV datalink – Reliable control for unmanned ground
vehicles Deploy faster. Scale smarter. Unlock next-gen mobility. |
Application
iWAVE's UGV datalink enables secure, long-range communication
between unmanned ground vehicles (UGVs) and control stations.
Perfect for: ✔ Military & Defense – Remote convoy operations & autonomous
missions ✔ Industrial Automation – Real-time control for logistics &
inspection UGVs ✔ Swarm Robotics – Seamless multi-UGV coordination ✔ Robust Connectivity – Low-latency, high-bandwidth data transfer | |
Specification
General | Wireless |
| Technology | Star Network based on IWAVE proprietary time slot frame structure &
waveform. | Communication | 1T1R1T2R2T2R |
| Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication |
| Data Rate | Max 100Mbps(Uplink and Downlink) | Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
| Range | 1-3km Non-line-of-sight | Auto Reconnection | Automatic link re-establishment after link failure/ re-deploy the
network after a link failure |
| Capacity | 64nodes | Sensitivity |
| MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ |
| Power | 23dBm±2 (2w, 5w or 10w on request) | 10MHZ |
| Latency | End to end≤5ms-15ms | 5MHZ |
| Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ |
| Anti-jam | FHSS(Frequency Hop Spread Spectrum) | 10MHZ |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ |
| Power Consumption | 5Watts | Dual Frequency Band |
| Power Input | DC5-32V | 1.4Ghz | 1420Mhz-1530MHz |
| Dimension and Weight | 71*60*10mm/33g | 600Mhz | 566Mhz-678Mhz |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |