Product Details
Ad Hoc Network Vehicle Emergency Radio Communication System
Introduction
Ad Hoc Network Vehicle Emergency Radio Communication System is the
only infrastructure independent communications solution that can
provide support in places where communications infrastructure is
either non-existent or severely damaged.
Unlike conventional, VHF/UHF, cellular and satellite telephony,
which all rely upon land-based infrastructure, a HF radio network
requires no fixed infrastructure. As such, it is often the only
reliable means of communications in critical conditions.
Communications over Mobile Ad Hoc Network simply requires a radio
and antenna at each location. No other fixed infrastructure is
needed, as IWAVE manet transceivers use the Mobile Ad Hoc Network
technology via special waveform to send radio signals hundreds of
kilometres.
Several MANET radio can wireless communicate with each other to
expand the network to any corner where require a voice
communication.
Key Features
| - Requires no fixed infrastructure unlike conventional networks such
as the traditional DMR VHF/UHF, cellular and satellite telephony,
which all rely upon land-based infrastructure.
- The MANET radio’s deployable nature enables a base of operations to
be established at any location, with pre-configured radios deployed
outward to remote locations.
- One-touch emergency button that also transmits GPS co-ordinates to
enable tracking.
- Power source directly from a vehicle battery, solar panel, or
generator to remain operational even when the vehicle is switched
off or AC power is not available.
- The unique nature of manet radio is such that it can be deployed in
any location, establishing a communications link with any other
manet radio on the network, no matter where in the world they are
located.
|
Interface
- PTT Key (Push-to-Talk Key)
- Emergency Call Key
- Power On/Off Key
- Switch Group/Channel
- Volume Key
- RF Antenna Port
- Programming Port
- HDMI Input Port
- IP Input Port
- WIFI Antenna Port
| |
Display Screen: Utilizes a TFT display screen with low power consumption,
providing clear visibility of device information even in bright
lighting conditions. MIC/SP (Microphone/Speaker): Interface for microphone connection, enabling monitoring and
calling functions. UART: Utilizes the dedicated IWAVE programming device through this
interface to manage device information and read/write data. ANT: Antenna port for connecting the corresponding feeder. HDMI: High-definition display interface. USB: Interface for mouse and keyboard connections. |
Application
Mission Commander is a Windows-based software suite that comes with
abundant features are available for unified dispatching among
different systems, such as individual call, group call, group
patching, all call, broadcast call, priority call, emergency call,
conference call, monitoring and ambience listening. It provides the
vital information required to make informed real-time decisions.
IWAVE offers a complete range of d-hoc base stations, radios,
accessories and passive components as well as ad-hoc mobile base
station&radios for emergency&rescue.
Specification
Frequency Options | VHF: 136-174MHz UHF1: 350-390MHz UHF2: 400-470MHz | Receiver |
Channel Spacing | 12.5kHz | Sensitivity (5% BER) (Digital)
| Static Sensitivity
| -117dBm
|
Multiple Access Method | TDMA | Dynamic Sensitivity | -110dBm |
Modulation and Demodulation | 4FSK | Sensitivity (12dB SINAD) (Analog) | -117dBm |
Continuous Data Rate (Per Carrier) | 9.6kbps | Maximum Signal Receive Level | -7dBm |
Carrier Frequency Error | ±0.1ppm | Adjacent Channel Selectivity | -65dB@12.5KHz/-70dB@25KHz |
Operating Humidity | 20% ~ 80% | Co-Channel Rejection | 12dB |
Storage Humidity | <80% | Blocking | 84dB |
Dimension | 65.5×159×166.5mm | Intermodulation | 70dB |
Weight | 3.1kg | Spurious Response Rejection | 70dB |
Operating Temperature | -30℃ ~ 60℃ | Conducted Spurious Emission | -57dB |
Transmitter |
Frequency Stability | ±0.1 ppm | Maximum Tolerance for Output Power Variation | ±1.5dB(Normal)/+2/-3dB(Extreme) |
RF Output Power | 5~20Watts Adjustable | Adjacent Channel Power | -65dB@12.5KHz/ -75dB@25KHz |
Conducted/Radiated Interference (Antenna Port) (Transmission Mode) | 9kHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm | Conducted/Radiated Interference (Antenna Port) (Idle Mode) | 30MHz~1GHz≤-36dBm 1GHz~12.75GHz≤-30dBm |
Intermodulation Attenuation | ≤-60dB@12.5KHz / ≤-70dB@25KHz | Adjacent Channel Power during Instantaneous Switching | ±12.5kHz≤-50dB ±25kHz≤-60dB |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |