Product Details
150km FPGA UAV Telemetry Video Data Link
Introduction
The FDM-680X Video Data Link adopts FPGA architecture, multi-wavelength, ultra-wideband,
high-speed frequency hopping technology as its core. This allows a
group of mesh nodes to form a seamless and highly secure private
network, even in line-of-sight (LOS) or non-line-of-sight (NLOS)
conditions, under fast-moving circumstances.
With its ultra-wide and robust frequency hopping, point frequency
characteristics, the device can hop 1200 times per second. This
makes it well-suited for UAVs to achieve anti-interference
capabilities in complex warfare environments. This feature ensures
that telemetry data control and remote video transmissions are more
stable and secure.
Advantages of Video Data Link
The FDM-6802PTM incorporates Carrier Aggregation (CA) technology,
which allows for the combination of two 20MHz carriers to form a
40MHz wireless bandwidth. This technology significantly boosts both
uplink and downlink transmission rates, while also improving the
robustness and adaptability of the wireless transmission system in
dynamic environments.
Key Features:
Enhanced Bandwidth: By aggregating two 20MHz carriers, it achieves a peak data rate
exceeding 100Mbps. Flexible Aggregation Options: It supports both continuous and non-continuous carrier aggregation,
offering greater flexibility. Adaptive Aggregation: The system can aggregate carriers of different bandwidths,
adjusting according to environmental interference and available
spectrum resources for better performance. Interference Resilience: The system can retransmit data across different carriers, ensuring
uninterrupted communication even if one carrier experiences
interference. Frequency Hopping: Frequency hopping between carriers allows for better identification
of interference-free channels, improving overall performance.
|
| |
Application
Mini UAS
Drone UAS
UGV
Ethernet Wireless Extension
Wireless Telemetry
NLOS Wireless Video Transmitting
Wireless Control Systems
Unmanned Aerial Vehicles (UAVs)
Unmanned Ground Vehicles (UGVs)
Autonomous Surface Vessels (ASVs)
Specification of Video Data Link
Functions | Description | Details |
PCB Size | 46.58±0 .15mm 52.00±0.15mm 2.90±0.10mm |
RF | Frequency | 1.4Ghz: 1420-1530MHz |
600Mhz: 566-678MHz |
RF Power Level | 23dBm±2(1.4Ghz) |
23dBm±2(600MHz) |
Sensitivity | 1Mbps | 1.4Ghz(14700 frequency point) 20MHz: -102dBm 10MHz: -100dBm 5Mhz: -96dBm |
600Mhz(6200 frequency point) 20Mhz: -102dBm 10MHz: -100dBm 5MHz: -96dBm |
5Mbps | 1.4Ghz(14700 frequency point) 20MHz: -95dBm 10MHz: -87dBm 5Mhz: -85dBm |
|
600Mhz(6200 frequency point) 20MHz: -95dBm 10MHz: -87dBm 5MHz: -85dBm |
Interface | UART | 3 |
HSIC | USB 2.0 High Speed |
USB | USB 2.0 High Speed |
I2C | 2 |
GPIO | 23 |
JTAG | 0 |
Antenna | 2 |
Power | VSYS | 3.7V~4.35V(4V is suggested) |
D1V8A | 1.8V Power Output |
D2V85A | 2.85V Power Output |
VCC_D3V3 | 3.3V Power Output |
5V_FEM | Powering the RF PA chip |
Master-slave node | Central Node Configuration | Any node in the network can be configured as the master node. |
Data Rate | All nodes share uplink and downlink system capacity data rate |
Capacity | Supports the number of network nodes N≥2 and up to 64 service nodes
or 63 IDLE state nodes. |
Communication Mode | Any node in the network can be configured as the master node. |
All nodes share uplink and downlink system capacity data rate |
Access | Support multiple slave nodes to access the network simultaneously. |
Data Rate | All slave nodes and master nodes share the working bandwidth in one direction. Concurrent upstream and downstream
(20Mhz, not less than 100Mbps) |
Connection Status | All nodes in the network remain connected at all times. |
Power Control | Adaptive adjust transmit power. |
Boot up | Both master node and slave nodes support preset |
Fixed Power | Fixed power configuration(modify master node only) |
Fixed Frequency | Locking frequency configuration |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |