Product Details
600Mhz To 1.4GHz L Band And UHF Wireless Digital Data Link For
Unmanned System
Introduction
New Dynamic Frequency Selection, Frequency Hopping & Independent
Uplink/Downlink Frequency delivers robust interference and antijam
immunity!
The miniature, lightweight and robust design allows the FD-780X to
be an ideal candidate for size sensitive applications. The high
speed, long range capabilities of the FD-780X allow for high
quality wireless video and telemetry communications.
With Time Division Multiple Access (TDMA) protocol FD-780X mesh
unmanned systems employ a token-managed channel access system in
which each network node is assigned a transmission slot. Based on
network parameters and data traffic, tokens are passed from one
node to another. As a result, if a node has more data to transmit,
its time slots will be longer. The designated node in the path to
the final destination can be a data endpoint or a repeater.
Advantages of Unmanned System (FD-780X)
Adjustable Total Output Power (-40dbm~+25dBm) Up to 32 nodes on a single frequency network Data rate upto be 100Mbps MIMO 2X2 mesh type wireless video transmitter and receiver Two versions on the transmission distance: 10km and 50km(with
external PA) Designed for integration into disparate unmanned systems and
sensors Communicate further and faster than ever before Communication, computing, and video encoding all in a single device Consolidate your computing, video encoding, communications, and
networking hardware Focus on what matters most: the mission, time on station, and
payloads Streamlined integration Bring your unmanned platform into the SDR system FD-780X users can now operate the unmanned platforms, watch the
video feeds, and steer the cameras Take your unmanned systems to the next level by adding swarming,
autonomy, and collaborative capabilities
| | |
Specification of Unmanned System (FD-780X)
Function items | Description | Details |
PCB | single-sided interface board | Tolerance range: 46.58±0.15mm 52.00±0.15mm 2.90±0.10mm |
RF | RF Band 1 | 1420-1530MHz |
RF Band 2 | 566-678MHz |
Power Level | 1.4G 23dBm±2 |
| 600MHz 23dBm±2 |
Sensitivity (1Mbps) | 1.4G(14700 channel) 20MHz -102dBm 10MHz -100dBm 5MHz -96dBm |
| 600M(6200 channel) 20MHz -102dBm 10MHz -100dBm 5MHz -96dBm |
Interface | UART | 3 |
HSIC | USB 2.0 High Speed |
USB | USB 2.0 High Speed |
I2C | 2 个 |
GPIO | 23 个 |
JTAG | 0 个 |
RF | 2T2R |
Power | VSYS | 3.7V~4.35V,suggest 4.0V (input) |
D1V8A | 1.8V output |
A2V85A | 2.85V output |
VCC_D3V3 | 3.3V output |
5V_FEM | RF PA chip power supply(Input) |
Network | Network Mode | Centerless Ad Hoc Network |
Capacity | Max 32nodes |
Hops | Support multi-hop routing topology, up to 31 hop |
Communication | Supports unicast, multicast, and broadcast transmission modes. Any
nodes can use these three modes for communication |
Data Rate | All nodes communicate and share the working bandwidth, and the max
rate is 100Mbps |
Time Synchronization | Independent of external clock, self-synchronous |
Power Control | All nodes adaptively adjust the transmission power |
Subnet Fusion | Support splitting one network into multiple networks |
Movement Speed | Maximum support 300km/h |
Retransmission | HARQ Retransmission |
Anti-jam | Supports dynamic frequency hopping within and across frequency
bands |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |