Product Details
Advanced Soc Development Board Transceiver For Extremely Small
Robotics
Introduction
The FD-610X Soc Development Board Transceiver is a new class of
industrial transceiver designed specifically for robotics
platforms. It is a Software Defined Radio based on our highly
robust MANET MESH waveforms. It optimises the use of available
channel bandwidth, which avoids collisions and provides a short,
predictable data packet latency. Wider bandwidth together with
advanced Interference Avoidance Scheme (IAS) maximises
communications effectiveness in contested environments and provides
protection against Electronic Attack (EA).
How do FD-610X Soc Development Board Work?
FD-610X Soc Development Board is designed to be paired with supported companion compute
platforms, embedded with intelligent flight controllers or
integrated in ground robotics platforms.
The result is a powerful, scalable solution for resilient
long-range robotic connectivity and HD video streaming transmitting
over a long non line of sight range in challenging and congested
environments.
| | |
Application
Specification
Transmitting | Master control module image acquisition device for data acquisition
and encoding | Camera |
The main control module send the encoded data to FD-610X through
the USB or HSIC interface | Physical interface USB/HISC, logically virtual into a network card |
FD-610X sends the encoded image data to the receiving end through
the air interface. | |
Receiving | The FD-610X receiving end gets the encoded image data and then
transparently transmits it to the main control module. | |
| FD-610X sends data to the main control module via USB or HSIC
interface. | Physical interface USB/HISC, logically virtual into a network card |
| After the main control module receives data, it performs image
decoding and display. | |
PCB Size | 43.40*45.00*3.00mm | |
RF | Frequency | 2.4Ghz: 2401.5-2481.5 MHz |
1.4Ghz: 1427.9-1467.9MHz |
800Mhz: 806-826 MHz |
RF Power | 25dBm | |
Sensitivity (Access) | 2.4Ghz(24415 Channel) 20Mhz:-99dBm 10Mhz:-103dBm 5Mhz:-104dBm 3Mhz:-106dB | Access |
1.4Ghz(14379 Channel) 10MHz:-103dBm 5Mhz:-104dBm 3Mhz:-106dBm | Access |
800Mhz(8160 Channel) 10MHz:-103dBm 5Mhz:-106dBm 3Mhz:-108dBm | Access |
Interface | UAR | 1 |
COM-UART | 1 |
HSIC | USB 2.0 High Speed |
US | USB 2.0 High Speed |
I2C | 1 |
GPIO | 6 |
JTAG | 1 |
Antenna | 2 |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |