Product Details
20km FPGA UAV Telemetry Video Data Link
Introduction
FDM-6800 is a broadband 2X2 MIMO data transmission device. It
supports a variety of bandwidth allocation and IP communication
function, allowing for the creation of a local wireless LAN. With
its two-way data transmission and lightweight design, it is
well-suited for small UAV telemetry control and low-latency video
acquisition.
Weighing just 33g, consuming only 5W of power consumption but
delivering 200mW of output power, the FDM-6800 is ideal for size
and weight critical UxV applications, offering the SWaP of a
bare-board solution.
The FDM-6800 is available in OEM (bare board) format for platform
integration. With our API document users can easily integrate it
into own system.
Application
FDM-6800 works in 600MHz and 1.4GHz dual-frequency band
simultaneously. Users can manually select the working frequency via
our network management. Users can also turn on the frequency
hopping function, at this time, FDM-6800 will work on both band.
Once interferenced, it will quickly and automatically hop its
working frequency between 600Mhz and 1.4Ghz.
Not only we build superior technology, we help you get the most
from it. Out-of-the-box functionality. Ongoing support. Relentless
research and development.
Features
One master node supports 64 slave node
Air to ground 20km wireless video, mavelink and telemetry data
transmission
Support non line of sight (NLOS) 1-3km mobile transmission
FHSS within bands and accross bands for anti-interference
Dual band selectable 600Mhz and 1.4Ghz
Frequency hop from 600Mhz to 1.4Ghz for anti-jamming
Small dimension, light weight, easy to install
Highly integrated modular combination design
RJ45/TTL/RS232/RS485/RS422/SBUS (Customizable)
Software defined radio,SDR, easy webpage operation
Network management software to real monitor the SNR, RSSI, Topology
and distance between nodes.
API document is available for integrated into the third party
platform.
Specification
Technology | Wireless based on TD-LTE Technology Standard |
Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 |
Data Rate | Up to 100Mbps(Uplink and Downlink) |
Communication Range | Air to ground 20km NLOS Ground to ground 1-3km |
Node | 64node |
MIMO | 2x2 MIMO |
RF Power | 23dBm±2 (2w, 5w or 10w on request) |
Latency | End to end≤5ms-15ms |
Modulation | Adaptive QPSK, 16QAM, 64QAM |
Anti-Jamming | FHSS(Frequency Hop Spread Spectrum) |
Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz |
Power Consumption | 5watts |
Power Input | DC5-32V |
Dimension | 72*60*10mm |
Weight | 33g |
Dual Band Frequency | 1.4G: 1420Mhz-1530MHz |
600Mhz: 566Mhz-678Mhz |
RF | 2 x IPX |
LAN Port | 3x Ethernet Port |
Comuart | 2xCOMUART |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |