Product Details
NLOS 3km Mesh Radio Module Hd Video Transmitter
Description
IWAVE offer both enclosed and OEM products to wirelessly move
serial data.FD-7800 features user selectable frequency within a
dual operating band 600Mhz(566Mhz-678Mhz) and
1.4Ghz(1420-1530Mhz)and programmable bandwidths
(1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz).IWAVE also offer high power
(up to 10W) communications to provide robust wireless link over
very long distance.FD-7800 is available in OEM (bare board) format
for platform integration to creat a advanced, scalable, and
efficient Mobile Ad Hoc Networking (MANET).
Key Features
The device can be equipped with video coding module, integrated
voice module, WLAN wireless module, GIS positioning module or
public network gateway module to meet the application requirements
of different scenarios.
FD-7800 adopts LTE-A's CA technology. Compared with MIMO mode, CA
mode has no restrictions on the antennas installation location and
spacing, which making deployment more flexible.
It adopts the Automatic frequency hopping technology for
anti-interference greatly reduce system power consumption and size
of the module.
The miniature, lightweight and robust design allows the FD-7800 to
be an ideal candidate for size sensitive applications. The high
speed, long range capabilities of the FD-7800 allow for high
quality wireless video and telemetry communications.
Application
Ethernet Wireless Extension
UGV Fleet Communication and management.
Mobile Team Communication
UAV Swarm Wireless Communication
Wireless Telemetry Data
Wireless Video
Control Systems for Unmannded Platform
Specification
Wireless |
Technology | Wireless based on TD-LTE Technology Standard |
Encryption | ZUC/SNOW3G/AES(128) Optional Layer-2 |
Data Rate | Max 120Mbps(Uplink and Downlink) |
Communication Range | Air to ground 10km NLOS Ground to ground 1-3km |
Node | 32node |
MIMO | 2x2 MIMO |
RF Power | 23dBm±2 (2w, 5w or 10w on request) |
Latency | End to end≤5ms-15ms |
Modulation | Adaptive QPSK, 16QAM, 64QAM |
Anti-Jamming | FHSS(Frequency Hop Spread Spectrum) |
Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz |
Power Consumption | 5watts |
Power Input | DC5-32V |
Dimension | 72*60*10mm |
Weight | 33g |
Serial Data | RS232/TTL |
Communication | Full duplex communication |
Up and Down Ratio | 2D3U/3D2U/4D1U/1D4U |
Automatic Reconstruction | Automatic re-establishment after link failure/ re-deploy the
network after a link failure |
Dual Band Frequency | 1.4G: 1420Mhz-1530MHz |
600Mhz: 566Mhz-678Mhz |
Interface |
RF | 2 x SMA |
LAN Port | 2x Ethernet Port |
Comuart | 1xCOMUART TTL 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity
check Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600
configurable) |
Power Input | 1xDC INPUT: DC5-32V |
Sensitivity |
1.4GHZ | 20Mhz: -102dBm |
10Mhz: -100dBm |
5Mhz: -96dBm |
600Mhz | 20Mhz: -102dBm |
10Mhz: -100dBm |
5Mhz: -96dBm |
Environment |
Working Temperature | -40℃~+80℃ |
Company Profile
WHO WE ARE?
IWAVE is headquartered in Shanghai. It is a high-tech
entrepreneurial company and has been engaged in the production and
R&D of mobile communications and application technology for 16
years. IWAVE focuses on the research and product development of
wireless communication technologies such as 4G, 5G (under
research), and MESH. It has established a mature product technology
system and successfully developed a series of products including
4G/5G core network and 4G/5G wireless private network series base
stations. As well as MESH wireless ad hoc network products, etc.
IWAVE communication system is designed based on LTE technology
standards. We have improved on the original LTE terminal technical
standards stipulated by 3GPP, such as physical layer and air
interface protocols, to make it more suitable for network
transmission without central base station control.
|  |
The original standard LTE network requires the participation and
control of base stations and core networks in addition to
terminals. Now each node of our star topology network devices and
MESH network devices is a terminal node. These nodes are lighter
and retain many advantages of the original LTE technology. For
example, it has the same architecture, physical layer and subframe
as LTE. It also has LTE’s other advantages such as wide coverage,
high spectrum utilization, high sensitivity, high bandwidth, low
latency, and dynamic power control.
Compared with normal wireless link, such as wireless bridge or
other devices based on wifi standard, the LTE technology has a
subframe structure, the uplink and downlink data rate is not same.
This characteristic enable the wireless link products' application
more flexible. Because the uplink and downlink data rate can be
adjusted based on real service requirements.
In addition to the self-developed product series, IWAVE also has
the ability to integrate upstream and downstream product resources
in the industry. For example, based on self-developed 4G/5G
industry products, IWAVE integrates wireless terminal products and
industry application platforms, thereby providing terminals - base
stations - core networks - End-to-end customized products and
industry solutions for industry application platforms. IWAVE
focuses on serving domestic and foreign industry partners, such as
special industry communications fields such as park ports, energy
and chemicals, public security, special operations, and emergency
rescue.
 | IWAVE is also a manufacture in China that develops, designs and
produces industrial-grade fast deployment wireless communication
devices, solution, software, OEM modules and LTE wireless
communication devices for robotic systems, unmanned aerial vehicles
(UAVs), unmanned ground vehicles (UGVs) , connected teams,
government defense and other type communication systems. IWAVE products provide fast deployment, high throughput, strong
NLOS ability, ultra long range communication to mobile users with
no reliance on fixed infrastructure. IWAVE keeps close touch with our military Government advisors and
different field end users to constantly improve the product quality
and performance.
|
HY IWAVE TEAM DETERMINED TO FOCUSE ON COMMUNICATIONS INDUSTRY?
The year 2008 was a disastrous year for China. In 2008, we suffer
from snowstorm in southern China, 5.12 Wenchuan earthquake, 9.20
Shenzhen fire accident, flood, etc. The disaster not only make us
more united but also made us realize high technology is life.
During emergency rescue, advanced high technology can save more
lives. Especially the communication system which is closely related
to the success or failure of the entire rescue. Because disaster
always destroy all the infrastructure, which make the rescue more
difficult. At end of 2008, We begin to focus on developing the rapid
deployment emergency communication system. Based on 14years of
accumulated technology and experiences, we lead localization
through reliability of equipment with strong NLOS ability, ultra
long range and stable working performance in the UAV, robotics,
vehicles wireless communication market. And we mainly supply the
fast deployment communication system to army, government agencies
and industries.
|  |