Thermoplastic Road Marking Materials Compliant With BS 3262 Durable Skid-Resistant And Reflective
Brand Name:HUA QUN
Certification:ISO9001
Model Number:HQ-224
Minimum Order Quantity:1 ton
Delivery Time:3-7work days
Payment Terms:L/C,T/T,Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou China
Address:
Room 522, Scientific Research Office Building,63 Punan Road,Huangpu District,Guangzhou,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Thermoplastic Road Marking Materials Compliant with BS 3262 Durable Skid-Resistant and Reflective
Product Description
BS 3262 refers to a British Standard that specifies requirements
for thermoplastic road marking materials, commonly used in the UK
and other regions that adopt British Standards. Thermoplastic paint
complying with BS 3262 is a durable, heat-applied marking material
designed for high-performance applications like road lines,
pedestrian crossings, and traffic symbols.
Key Properties (Per BS 3262):
- Durability: Resistant to wear, weathering, and UV degradation, making it ideal for outdoor use.
- Skid Resistance: Must meet minimum standards (especially Type 3) to ensure safety for vehicles and pedestrians.
- Reflectivity: For Types 2 and 3, glass beads provide nighttime visibility under headlights.
- Color: Typically available in white or yellow, with strict requirements for luminance and color stability over time.
- Adhesion: Designed to bond well to road surfaces, often requiring a clean, dry substrate and sometimes a primer for concrete.
Specification
| Gravity(g/㎥) | 2.1g/㎥ |
| Color | Yellow, Orange, Red and etc. |
| Heating Temperature | 180℃-220℃ |
| Softening Point(℃) | 110℃ |
| Coating Appearance | No wrinkles, dots, blisters, cracks,fall-out&stick tyres |
| Drying Time(min) | Within 3 minutes |
| Chroma Performance | Reverse materials(white) |
| Compressive Strength(Mpa) | 26 |
| Abrasive Resistance(mg) | 42 |
| Alkali Resistance | Great (in saturated solution of calcium hydroxide for 24 hours |
| Glass Beads(%) | 19% |
| Fluidity(s) | 40s |
| Coating Resistance | Resis -10℃ for 4 hours |
| Package | 25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons |
| Heat Resistance | Under 200℃-220℃ for hours |
| Material | C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on. |
| Application | Road marking, straight line, dotted line, curve, oriented arrow,letter and etc. |
| Water Resistance | Great (in water for 24 hours) |
Steps to Use Thermoplastic Paint:
- Surface Preparation:
- Clean the surface thoroughly to remove dirt, dust, oil, or loose debris. Use a broom, wire brush, or pressure washer as needed.
- Ensure the surface is dry, as moisture can prevent proper adhesion.
- For porous surfaces like concrete, you may need to apply a primer to enhance bonding. Check the manufacturer’s instructions.
- Heat the Thermoplastic:
- Load the thermoplastic material into a preheater or melting kettle.
- Heat it to the recommended temperature, typically between 180°C and 220°C (356°F to 428°F), depending on the specific product. Stir occasionally to ensure even melting and to avoid scorching.
- Monitor the temperature carefully—overheating can degrade the material.
- Test the Consistency:
- The molten thermoplastic should have a smooth, liquid consistency, free of lumps. If it’s too thick, it won’t apply evenly; if too thin, it may not set properly.
- Apply the Paint:
- For Road Markings: Use a striping machine or screed box to pour the molten thermoplastic onto the surface in the desired pattern. Work quickly, as it begins to cool and harden once applied.
- For Smaller Areas: Use a hand-held applicator or trowel to spread the material evenly.
- Maintain a consistent thickness (usually 1.5–3 mm, depending on the project requirements).
- Add Glass Beads (Optional):
- For reflective markings (e.g., road lines), sprinkle glass beads over the wet thermoplastic immediately after application. The beads will embed as it cools, improving visibility.
- Cooling and Setting:
- Allow the thermoplastic to cool and harden naturally. This typically takes 5–15 minutes, depending on the ambient temperature and thickness. Avoid disturbing the area during this time.
- Clean Up:
- Clean your equipment while the thermoplastic is still warm using a scraper and solvent (if recommended by the manufacturer). Once it hardens, removal becomes much harder.
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
Thermoplastic Road Marking Materials Compliant With BS 3262 Durable Skid-Resistant And Reflective
Inquiry Cart
0