

Add to Cart
Product Description
Thermoplastic paint is a type of paint that becomes soft and moldable when heated and hardens as it cools. It's made from thermoplastic resins, which are materials that don’t undergo a chemical change when heated—meaning they can be reshaped or re-melted without degrading.
- Composition Ingredients
- Synthetic Resin: It is the main component of thermoplastic road marking paint, such
as rosin and its derivative modified resins, petroleum resins,
polyester resins, etc. It has adhesive properties and quick-drying
characteristics, enabling the paint to adhere to the road surface
and bond through hot melting.
- Glass Beads: Usually with a diameter of 0.1-1.4 millimeters, they are colorless
and transparent. They can improve the recognizability of the
markings at night, enhance brightness and durability, and also
protect the markings from wear.
- Pigments: Mainly white and yellow, such as titanium dioxide, zinc oxide,
heat-resistant chrome yellow, organic yellow pigments, iron oxide,
etc., which play a role in coloring and covering.
- Fillers: Such as calcium carbonate, sand, etc., which can ensure the
mechanical strength, wear resistance, and color of the paint. The
particle size of the fillers will affect the fluidity,
sedimentation degree, and surface finishing of the paint.
- Additives: They can increase the plasticity of the coating, making it
resistant to sedimentation, pollution, and fading.
Thermoplastic Property:
The defining characteristic of thermoplastic paint is its ability
to melt at high temperatures. When heated (typically between 180°C and 200°C or 356°F to 392°F), the solid paint transforms into a liquid state, making it easier
to apply. Once it cools and hardens, it forms a durable,
wear-resistant surface.
Durability:
Thermoplastic paint is known for its long-lasting performance. It is highly resistant to wear and tear from traffic, weather
conditions, and UV exposure, making it an excellent choice for
high-traffic areas. The paint maintains its effectiveness even
under harsh conditions like heavy rainfall, extreme temperatures,
and constant vehicular traffic.
Reflectivity:
One of the significant advantages of thermoplastic road markings is
their reflective properties. Glass beads are often embedded in the paint during or immediately
after application. These beads enhance the visibility of the road
markings at night or in low-light conditions by reflecting
headlights, improving safety for drivers and pedestrians.
Quick Drying:
After application, thermoplastic paint cools and solidifies
relatively quickly—usually within minutes. This quick drying time allows roads to be opened to traffic soon
after application, minimizing disruption.
Eco-Friendly:
Thermoplastic paints are often more environmentally friendly than
traditional solvent-based paints. They typically contain fewer
volatile organic compounds (VOCs), reducing their environmental
impact. Additionally, they have a longer lifespan, meaning less
frequent reapplication and reduced waste.
Specification
Gravity(g/㎥) | 2.1g/㎥ |
Color | Yellow, Orange, Red and etc. |
Heating Temperature | 180℃-220℃ |
Softening Point(℃) | 110℃ |
Coating Appearance | No wrinkles, dots, blisters, cracks,fall-out&stick tyres |
Drying Time(min) | Within 3 minutes |
Chroma Performance | Reverse materials(white) |
Compressive Strength(Mpa) | 26 |
Abrasive Resistance(mg) | 42 |
Alkali Resistance | Great (in saturated solution of calcium hydroxide for 24 hours |
Glass Beads(%) | 19% |
Fluidity(s) | 40s |
Coating Resistance | Resis -10℃ for 4 hours |
Package | 25kg/bag, by plastic woven bag. One 20’container can load Max 26 tons |
Heat Resistance | Under 200℃-220℃ for hours |
Material | C5 Petroleum Resin, CACO3, Wax, Glass Beads, EVA, PE and so on. |
Application | Road marking, straight line, dotted line, curve, oriented arrow,letter and etc. |
Water Resistance | Great (in water for 24 hours) |
Density(g/cm3) | 1.8-2.3 |
Softening point (℃) | 90-125 |
Compressive Strength(MPa) | ≥12 |
Glass bead content(%) | 0-30% |
Liquidity | 35±10 |
Packing | 25kg/bag |
Color | White/Yellow/Blue/Red/Green/Customized |
Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
Appearance | Powder |
Construction temperature | 180℃-220℃ |
Whiteness | 70-85(Customized) |
Inverse coefficient | 50-550 |
Warranty | 12 months |
Storage Method | Avoid light and moisture |
Packing Size | 45×70×5CM |