Electronic Load Module with 0~500V Input Voltage 0.1~10A Input Current and 100W Single Channel Power for DC Charger Power Testing
Brand Name:CPET
Model Number:8102
Minimum Order Quantity:10sets
Delivery Time:5-8 work days
Payment Terms:D/A,T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Building 1, No. 33, Patang Road, Loucun Community, Guangming District, Shenzhen, China XinHu Street,Guangming District, Shenzhen, China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Scope of application
Isolated & non-isolated LED driver TV power, LED backlight driver
Power charger, adapter DC-DC converter
Power with multiple voltage output and positive & negative voltage
output
Outstanding functions
1. Be of five kinds of load modes, such as CC, CV, CR, CP and LED.
2. Support simulation of LED steady state operating point, with
programmable internal resistance coefficient of LED.
3. Support parallel connection of channels under any load modes and
meet the requirements for product power extension.
4. Support monitoring of peak value and valley value of voltage and
current (ripple frequency below 10 KHz).
5. Support the maximum dynamic load of 5K and programmable rising
and falling slope of current.
6. Programmable current up and down the slope.
7. Support settings of Von/Von latch.
8. Support output of PWM dimming signals.
9. 2 Road extension logic signal output.
10. Support anomaly detection of voltage and current output above
100 us.
11. Apply 6½ regulator to calibrate automatically.
12. Meet the requirements for burn-in test of power from low
voltage to high voltage and from low current to large current.
13. Isolate through multi-channels, and support burn-in test for
isolated & non-isolated power and multi-channel output power.
14. Support output for PASS/FAIL detecting signals of tested module
15. Be of protection functions for over-temperature, over-current
and over-power.
Performance parameters
| Model | CP-8102 | CP-8103 | CP-8104 | CP-8108 |
| Input voltage range | 1-500V | 1-500V | 1-500V | 1-500V |
| Input current range | 0.05-10A | 0.05-10A | 0.05-10A | 0.05-5A |
| Single channel power | 100W | 125W | 150W | 40W |
| Pull mode | CC/CV/LED/CR/CP | |||
| Votage comtrol precision | ±1%+0.5%FS | |||
| Voltage accuoacy | ±1%+0.5%FS | |||
| Current readback accuracy | ±1%+0.5%FS | |||
| Communication mode | RS-485 | |||
| Channel isolation | Y | N | ||
| Model | CP-8118 | CP-8119 | CP-8130 |
| Input voltage range | 2-100V | 2-100V | 1-200V |
| Input current range | 0.2-5A | 0.2-6A | 0.5-1A |
| Single channel power | 50W | 65W | 100W |
| Pull mode | CC/CV | CC/CV | LED |
| Votage comtrol precision | ±1%+0.5%FS | ||
| Voltage accuoacy | ±1%+0.5%FS | ||
| Current readback accuracy | ±1%+0.5%FS | ||
| Communication mode | RS-485 | ||
| Channel isolation | N | N | Y |
Electronic Load Module with 0~500V Input Voltage 0.1~10A Input Current and 100W Single Channel Power for DC Charger Power Testing
Inquiry Cart
0