Multifunctional EP Additives Anti Wear Agents For Lubricants Liquid

Multifunctional Antiwear Additive Phosphate Ester Amine Salt

Phosphate Ester Amine Salt

BSD3918 is a light yellow transparent liquid, a phosphorus nitrogen agent synthesized from

phosphate esters and long-chain fatty amines. It is an ashless multifunctional additive with

extreme pressure, wear resistance, and rust prevention properties. It can be used for industrial

oils such as Gear oil, hydraulic oil, compressor oil, metalworking oil, etc.

Product Features

●Improve the FZG performance

●Good friction performance, can be used as a friction modifier

●Synergistic effect with sulfur containing anti wear agents

●This product has good oil solubility and can be used in various types of mineral base oils, PAO,

and ester oils

Recommended Dosage (wt%)

Gear oil 0.2% - 1.0%

Lubricating grease 0.5-%-1.0%

Hydraulic oil 0.2%-0.5%

Metal working oil 0.3%-0.5%

Typical Inspections

Product Appearance

Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according

to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with

SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).