Geological Hard Rock Core Drilling Machine Wireline Geo Core Drill Rig
Brand Name:Aoxing
Certification:ISO9001
Model Number:QYD-400
Minimum Order Quantity:1 Set
Place of Origin:Hebei,China
Supply Ability:30 Sets/Month
Contact Now
Add to Cart
Verified Supplier
Location:
Hengshui Hebei China
Address:
Xiaoliutun Industrial Zone, Jingzhou Town, Jing County, Hengshui City, Hebei Province China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Geological Drilling Hard Rock Core Machine Wireline Geo Core Drilling Machine Core Drill Rig
Full hydraulic core exploration drilling rig uses and advantages
1. This full hydraulic core exploration drilling rig using for
prospecting, gold ore, iron ore, coal, lithium ore, rubidium ore,
stone ore, etc.
2. It is easy to install, and the rope coring process does not need
to lift the drill pipe. The winch is connected to the salvage
device, and the coring efficiency is high.The traditional vertical
shaft control machine drills and lifts the drill pipe, which has
low efficiency and troublesome disassembly and assembly of the
tower, which requires large equipment to be lifted and transported,
and the cost is high.Full Hydraulic 400m 600m 800m depth rock core
drill equipment wireline coring hydraulic drill rig
3. Thin-wall drilling tools, the core diameter is 56, and the wall
of the drill bit is thin. Traditional drilling rig Core diameter 48
bit wall thickness.
1. Easy to install, you can start drilling in half a day
2. Fully hydraulic, high drill coring efficiency, 300 meters of
drilling can be achieved in 3 days.
3. Crawler chassis, short outriggers, more stable work.
4. Factory direct sales, affordable price.
5. Remote control walking, safer and more reliable during working.
Safety regulations for drilling rigs
1. The drilling work site should be kept clean.
2. When installing and dismantling the drilling rig, it is necessary to ensure correctness and completeness without any defects.
3. When lifting the mast of the drilling rig, the operator should stand in a safe position.
4. When starting the electric motor, all friction clutches of the drilling rig should be opened.
5. When the drilling rig is working, it is strictly prohibited to remove the protective cover.
6. Before starting work, the reliability of the braking device, as well as the performance of the friction clutch and starting device, should be checked.
7. Before the electric motor stops, it is prohibited to inspect the drilling rig.
8. It is strictly prohibited to tighten any parts of the drilling rig during operation.
9. When the drilling rig is in operation, refueling is strictly prohibited. The upper pulley of the mast should be refueled when the drilling rig is stopped.
10. It is not allowed to work on the mast before the electric motor stops.
11. In any case, when someone is working on the upper section of the mast, no other personnel are allowed to stay under the mast.
12. In case of severe weather (rainstorm, heavy snow, ice or wind above level 5), [3] it is not allowed to work on the mast. At the same time, it is not allowed to use artificial lighting to work on the mast.
13. It is strictly prohibited to use steel wire ropes with cracked strands.
14. When lifting and lowering drilling tools, it is strictly prohibited to touch the steel wire rope with hands.
15. Except for lifting the drilling rig and drilling pipes, the wellhead is strictly prohibited from being opened.
16. In order to prevent the swinging of drilling tools or extraction tubes when they are taken out of the well, hooks made of steel rods with a diameter of 15-20mm must be used to hook them.
17. When cleaning the suction tube, a sturdy and reliable steel wire rope should be used to form a loop, wrapped around the lower end of the suction tube, and flipped over.
18. When using pulleys to lift or lower casing, as well as during salvage operations, all workers should leave the drilling site.
19. When using a crane to pull out the casing, in order to prevent the casing from falling off, it must be fixed together.
20. When the lighting is stopped (at night), drilling work should be stopped. When the drilling tool is still in the well, it should be carefully removed from the well.
1. The drilling work site should be kept clean.
2. When installing and dismantling the drilling rig, it is necessary to ensure correctness and completeness without any defects.
3. When lifting the mast of the drilling rig, the operator should stand in a safe position.
4. When starting the electric motor, all friction clutches of the drilling rig should be opened.
5. When the drilling rig is working, it is strictly prohibited to remove the protective cover.
6. Before starting work, the reliability of the braking device, as well as the performance of the friction clutch and starting device, should be checked.
7. Before the electric motor stops, it is prohibited to inspect the drilling rig.
8. It is strictly prohibited to tighten any parts of the drilling rig during operation.
9. When the drilling rig is in operation, refueling is strictly prohibited. The upper pulley of the mast should be refueled when the drilling rig is stopped.
10. It is not allowed to work on the mast before the electric motor stops.
11. In any case, when someone is working on the upper section of the mast, no other personnel are allowed to stay under the mast.
12. In case of severe weather (rainstorm, heavy snow, ice or wind above level 5), [3] it is not allowed to work on the mast. At the same time, it is not allowed to use artificial lighting to work on the mast.
13. It is strictly prohibited to use steel wire ropes with cracked strands.
14. When lifting and lowering drilling tools, it is strictly prohibited to touch the steel wire rope with hands.
15. Except for lifting the drilling rig and drilling pipes, the wellhead is strictly prohibited from being opened.
16. In order to prevent the swinging of drilling tools or extraction tubes when they are taken out of the well, hooks made of steel rods with a diameter of 15-20mm must be used to hook them.
17. When cleaning the suction tube, a sturdy and reliable steel wire rope should be used to form a loop, wrapped around the lower end of the suction tube, and flipped over.
18. When using pulleys to lift or lower casing, as well as during salvage operations, all workers should leave the drilling site.
19. When using a crane to pull out the casing, in order to prevent the casing from falling off, it must be fixed together.
20. When the lighting is stopped (at night), drilling work should be stopped. When the drilling tool is still in the well, it should be carefully removed from the well.
Geological Hard Rock Core Drilling Machine Wireline Geo Core Drill Rig
Inquiry Cart
0