Explosion Protection Explosion Containment Chamber UL 9540A Certified Customizable Design Battery Needle Testing Machine
Brand Name:Neide
Certification:CE
Model Number:ND-562
Minimum Order Quantity:1 set
Delivery Time:7-15 work days
Payment Terms:L/C,D/A,D/P,T/T,Western Union,MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No. 13, Shihuan Road, Dongcheng Sub-district, Dongguan City, Guangdong Province
Supplier`s last login times:
within 21 hours
Product Details
Company Profile
Product Details
Dual-Wall Explosion Containment Chamber UL 9540A Certified Solid-State Battery Fire Suppression
Safely conducts overcharge/over-discharge testing by isolating batteries within a sealed explosion-proof enclosure, while connected to external testing equipment. Protects operators and instruments from thermal runaway hazards.
Neide UL-certified Explosion Containment Chamber enables safe overcharge/over-discharge testing up to 1000V/500A. The customizable 304 stainless steel enclosure (optional viewport/port configurations) isolates battery failures while protecting personnel and equipment. Compliant with IEC 62133 Annex H explosion requirements for global market access."
Key Features:
✅ Explosion Protection - 10mm reinforced steel walls (ASME Section
VIII compliant)； - Pressure-relief venting directs blast upward； ✅
Customizable Design - Chamber dimensions/configurations tailored to
cell/pack size； - Multi-port interfaces for test leads and thermal
probes； ✅ Compliance Ready - Pre-installed mounting racks for UL
1642 · IEC 62133 · UN 38.3 tests； - Flame arrestors on all cable
ports (ATEX Category 1 certified)；
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Name | Dual-Wall Explosion Containment Chamber |
| Internal Dimensions | 500×500×500mm (L×W×H) ※ Customizable upon request |
| External Dimensions | Approx. 700×600×1660mm (L×W×H) |
| Control Panel | Top-mounted HMI interface |
| Door System | • Single right-to-left opening door • Stainless steel inner door with silicone compression seal • 200×250mm viewport with explosion-proof mesh |
| Internal Material | 1.0mm mirror-finished stainless steel |
| External Material | 1.0mm cold-rolled steel with powder coating |
| Insulation System | • Marble base insulation plate • PTFE-lined walls (flame-retardant/chemical-resistant) • Easy-clean surface |
| Test Ports | Two Ø50mm ports (upper/lower chambers) |
| Door Lock | Heavy-duty hinges + blast-proof latch system |
| Mobility | Four lockable casters with brakes |
| Lighting | On-demand LED illumination |
| Smoke Extraction | Dual Ø90mm rear vents → Ducted exhaust with manual blower control |
| Pressure Relief | 150×150mm ASME-certified vent + door restraint chains (prevents detachment) |
| Electrical Safety | Ground protection + fast-acting fuses |
| Power Supply | AC 220V/50Hz, 5A, 1.0kW |
| Weight | Approx. 120kg |
| Optional Features | Fire suppression system • Video monitoring • Electronic locking |
Hot-Selling Products:
Explosion Protection Explosion Containment Chamber UL 9540A Certified Customizable Design Battery Needle Testing Machine
Inquiry Cart
0