 
                            
Add to Cart
Cutting Edge GPS Smart Helmet: A Must - Have for Mining and Construction
High - precision GPS sensors ensure accurate location tracking, even in signal - challenged areas like deep mines or large construction complexes.
The hard - hat is made of a durable, impact - resistant material that can withstand falling rocks in mines and heavy - duty construction debris.
An integrated emergency distress button enables workers to send out an immediate alert in case of danger.
| Type | Item | Description | 
|---|---|---|
| Color | Color | White, red, blue, yellow | 
| Identification | 
 | |
| Material | ABS material | |
| Size and Weight | Size | 304.7mm * 240.0mm * 165.4mm (length * width * height) Meet GB/T2811 - 2019 standard relevant safety helmet size regulations | 
| Weight | ≤540g | |
| Material and Protection Performance | Impact Absorption | |
| Anti - penetration | Designed according to GB/T2811 - 2019 standard | |
| IP Rating | On the basis of IP66, it can protect against alcohol spray | |
| Drop Resistance | Function does not fail after a 2 - meter drop | |
| Calculation and Storage | CPU | UIS8910FF | 
| RAM | 128Mb | |
| ROM | 64Mb | |
| System | RTOS | |
| Communication and Positioning | Communication Band | 
 | 
| Positioning | Support GPS/BeiDou | |
| Antenna | 1 main antenna + GPS ceramic antenna 1 | |
| External Interface | Data and Charging Port | |
| SIM Card Slot | Support SIM card (tri - network) | |
| Battery | Battery Specification | 
 | 
| Button | Reset button (hidden type) | |
| Indicator Light | Power | |
| Accessories | Data Cable | |
| Battery | Built - in: 3000mah (confirm supply cycle) | |
| Lining | 1 set (new lining confirm supply cycle) | |
| Working Environment | Working Temperature | -10°C ~ 60°C | 
| Working Humidity | 10% ~ 60% | 
