Hbf52-17o High-Temperature Box Furnace In High-Temperature Sintering Process Of Electronic Devices

2. Mainly Specifics:

1. Rated Temp: 1650ºC
2. Max Temp: 1700ºC
3. Furnace chamber dimensions: 480×390×540 (W×H×D);
4. . Effective loading dimensions: 350×300×500mm (W×H×D);
5. Heating element: U-shaped molybdenum disilicide rod;
6. Cleanliness assurance: The inner chamber is constructed with high-purity alumina foam ceramic to ensure cleanliness at high temperatures;
7. Temperature control stability: ±1ºC, with PID parameter self-tuning function;
8. Temperature uniformity: ±2.5ºC (tested at 1650ºC for 2 hours under empty furnace conditions using a 9-point thermocouple ring);
9. Temperature control thermocouple: Type B;
10. Number of temperature control points: 1;
11. Number of temperature control segments: 4×16 segments;
12. Furnace atmosphere: Air;
13. Exhaust chimney: Located at the rear of the furnace chamber, with manually adjustable exhaust volume;
14. Alarm protection: Audible and visual alarm protection for over-temperature, thermocouple breakage, etc., with over-temperature alarm and power-off protection function;
15. Maximum heating power: 25kW;
16. Empty furnace holding power: ≤10kW;
17. Surface temperature rise: ≤40ºC;
18. Equipment weight: Approximately 950kg;
19. External dimensions: Approximately 1130×1950×1150mm (W×H×D), excluding feet, chimney, and indicator lights;

4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 2 - 6m³ /h.
4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
4.4 Ground requirements: level, no obvious vibration, bearing capacity > 300Kg/m² .
4.5 Power conditions: capacity greater than 34kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 2000mm×3000mm×1500mm (W×H×D), installation area greater than 3m².

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.

1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.

Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.

Our products include Bell Furnaces, Box Furnaces, Hot Air Dryer, Tube Furnaces, Vacuum Furnaces, Trolley Furnaces, and Rotary Furnaces. All of which are widely used in scientific research and experimentation in advanced ceramics, additive manufacturing, powder metallurgy, new energy and other fields. Suitable for the extrusion, sintering process of magnetic materials, honeycomb ceramics, alumina ceramics, zirconia ceramics, CIM/MIM, and positive and negative electrode materials of lithium batteries, as well as various other new materials such as pre-firing, extrusion, degreasing, firing, drying, co-firing, post-firing, soldering, curing, ceramic metallization, etc.

We insist responsible attitude towards customers and provide high-quality products and services. It is precisely because of the support, understanding, and trust of our customers and friends that our intelligent equipment manufacturing capabilities continue to improve. We are willing to work with customers to support the rapid development of electronis and advance materials all over the world.