4.3 Inch High Brightness TFT Display RGB 480x272 Normal Black IPS SC7283
Brand Name:ESEN
Certification:ISO9001/ISO14001
Model Number:T43H4505
Minimum Order Quantity:1000/PCS
Delivery Time:7~10 working days
Payment Terms:L/C,T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
Unit 901B, 9th Floor, Block D, Cai Fu Gang International Building, Bao Yuan Road, Bao An District, Shenzhen,China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
4.3-inch Rgb 480x272 Tft Normal Black Ips Sc7283 High Brightness
Tft Display
Module size: 105.5(W)* 67.2(H) * 2.9(T) mm 480 x RGB x 272 Dots Driver: SC7283
4-wire Resistive Touch Screen, WHITE LED backlight, Top view, Wide temperature range, Transmissive polarizer, 500 NITS, RoHS Compliant
The Resistive touch panel senses a touch by measuring where contact is made on the glass. It is independent of temperature and humidity and simple to integrate independent of a separate controller chip.
The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.
Suggestions for using LCD modules
1 .The display panel is made of glass and polarizer. As glass is fragile. It tends to become or chipped during handling especially on the edges. Please avoid dropping or jarring. Do not subject it to a mechanical shock by dropping it or impact.
2 .If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
3 .Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. Do not touch the display with bare hands. This will stain the display area and degraded insulation between terminals (some cosmetics are determined to the polarizer).
4 .The polarizer covering the display surface of the LCD module is soft and easily scratched.Handle this polarizer carefully. Do not touch, push or rub the exposedpolarizers with anything harder than an HB pencil lead (glass, tweezers, etc.). Do not put or attach anything on the display area to avoid leaving marks on it. Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizer. After products are tested at low temperature they must be warmed up in a container before coming in to contact with room temperature air.
5 .If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following solvents - Isopropyl alcohol - Ethyl alcohol Do not scrub hard to avoid damaging the display surface.
6 .Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.
4.3 Inch High Brightness TFT Display RGB 480x272 Normal Black IPS SC7283
Inquiry Cart
0