Auto AC conditioning compressor FORD F150 RAPTOR 98324

Auto AC conditioning compressor FORD F-150 RAPTOR 98324 DS81005

• Suitable vehicle type:

Mainly used in the Ford midsize range, including:

◦ Ford Fusion (2013-2019 model)

◦ Ford Escape (2013-2019 model)

◦ Lincoln MKZ (2013-2019 models)

◦ Some used models are compatible with market modifications

• Production cycle: 2012-2020 (cumulative production of more than 2.5 million units)

• Positioning: The main model of family car and SUV, taking into account energy saving and reliability

Core performance parameter

Item Parameter Value Industry comparison
Cooling capacity (kW) 2.1 Average 1.8-2.0kW at the same level
Shaft power (kW) 0.75 Energy efficiency ratio COP=2.8
Working pressure range High pressure 1.8-2.2MPa/Low pressure 0.18-0.3MPa Ultra-high pressure design (pickup level)
Standard speed 800-6000rpm (PID control) Frequency conversion response speed ≤100ms
Noise level 42dB(A) @1000rpm 15% lower than conventional compressors
Self-lubricating bearing life 300,000km /15 years industry average 200,000km

Structural technology highlights

1. Double rotor swash plate design

• Advantages: 22% higher cooling capacity than single-rotor compressor, 12% lower fuel consumption

• Patented technology:

◦ 7075 Aviation aluminum forging cylinder (Tensile strength ≥310MPa)

◦ Silicon carbide coated piston ring (friction coefficient < 0.05)

2. Intelligent Pressure Compensation System (iPCS)

• Dynamic adjustment of swash plate inclination (0°-60° no pole adjustable)

• Application scenarios:

◦ High altitude area (above 5000m, refrigeration efficiency maintained 90%+)

◦ Extreme temperature difference environment (-30℃~60℃ stable operation)

3. Modular refrigerant circuit

• Compact piping design (35% reduction in total length)

• Integrated structure of built-in drying bottle + sight glass (reduces leakage point by 40%)

Installation and maintenance Guide

• Interface specifications:

◦ High pressure pipe diameter: Φ9.5mm (R134a refrigerant)

◦ Low pressure pipe diameter: Φ6.4mm

◦ Compatibility: Support R134a/R1234yf refrigerant (need to change the seal)

• Typical replacement cycle:

◦ Original state: 8-10 years / 160,000 km

◦ Heavy use (high temperature/high humidity environment) : 5-7 years / 120,000 km

• DIY notes:

1. Before replacement, vacuum to ≤50Pa (hold pressure for 30 minutes without leakage)

2. It is recommended to use Ford original refrigerant (Model: PAG 460A)

3. Brake booster pump linkage check (some models need to reprogram ECU)

FAQ:

Q1. How is quality ensured?

A. All our processes strictly adhere to ISO-9001 procedures and we have a one year quality warranty B L issue date. If the product does not work property as described, and the problem is proven to be

at our fault, we will provide exchange services for the same specific item.

Q2.Do you make customer's auto AC parts?

A. Yes, you can send us samples and we can develop the new models especially for you.

Q3.What is your Minimum Order Quality?

A. Different products have different MOQ, but we can sell you even one piece if we have stock the model of you need.

Q4. What about delivery time?

A. If we have stock of the item you need, we can send goods to you within 3 working days after deposit or 100% payment into our bank account. If we don't have stock, generally it takes us around 10~30 working days to manufacture.

Q5. What's your agency distributor policy focused on auto AC parts?

A. We have some different policies according to target markets, so please send emails for detailed discussions or talk face to face.

Founded in 2003, the company is located in Guangzhou, China, one of the world's most prosperous production and sales bases for automobile vehicles and parts.
The company is a set of automotive air conditioning compression R & D, production and sales in one of the enterprises, has been committed to the research of Japan Denso, Sanelectric, Valeo, Jack Cel, Konecco, Panasonic and Mitsubishi compressor structure and working principle, after a lot of anatomy and testing, has its own mature technical elite team and data system, Through the mature shell die-casting and rough, finishing foundation with a full range of parts testing and testing, coupled with the overall performance of the whole machine and durable running test, the product to OEM matching factory standards, appearance and every detail is consistent with the original to form its own technical core competitiveness.
The compressor produced by the Japanese NASIDE brand has reliable quality, stable operation and ultra-low noise, and enjoys the reputation of "starting from the original factory, better than the original factory" in the industry, and has been recognized by customers with professional and good after-sales service. The products are exported to Europe, the United States, the Middle East, Africa and Southeast Asia markets.
The company adhering to the original factory is better than the original "development concept, and constantly improve and improve products
Durable properties. Now is the time to spread your wings and fight the sky! We are willing to work hand in hand with all the elites in the industry to strive for higher positioning and development goals! Realize the Made in China dream!