Accurate Ultrasonic Sludge Level Sludge Interface Sensor
Brand Name:JUGE
Certification:IOS9001, CE
Model Number:AG6080
Minimum Order Quantity:1 Unit
Delivery Time:5-8 working days
Payment Terms:Online order,T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Nanjing China
Address:
2F, BLK A, TAIPING IND PARK, #219 JIANGJUN AVE, JIANGNING DISTRICT, NANJING, CHINA
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Ultrasonic Sludge Level Sludge Interface Sensor
>>Technical Parameter
Measurement Method: Ultrasonic
Housing Material: 304 Stainless Steel or Customizable
Ingress Protection Rating: IP68
Measuring Range: 0.2 - 12 m
Blind Zone: < 20 cm
Accuracy: < 1% F.S. (Full Scale)
Ambient Temperature: -25 to 80 °C
Cable Length: Standard 10-meter dedicated cable; no intermediate connections permitted.
>>Size
>>Installation Diagram
When selecting the probe installation location, the following standards must be followed:
○ The probe should be perpendicular to the sludge surface and the bottom of the tank.
○ There should be no obstacles within the emission range directly below the probe to avoid ultrasonic signals being blocked or reflected by obstacles.
○ The probe should be installed away from areas with sudden flow velocity changes that cause gas bubbles and activated floating solids to ensure accurate and stable measurements.
○ The probe should be installed away from the inlet and outlet.
○ The sensor probe must be fully submerged in water. If the tank wall is vertically straight and the surface is flat, refer to the table below to determine the distance from the tank wall.
○ If the tank wall has an irregular surface, or has brackets, pipes, or other objects, the distance from the tank wall must be increased to avoid interference caused by these objects on the measurement.
Accurate Ultrasonic Sludge Level Sludge Interface Sensor
Inquiry Cart
0