Product Details
Portable Area Wireless Battery Multi Gas Detector Toxic Harmful
Combustible Gases
>>Overview
The portable area gas detection and alarm device integrates gas
detection, battery power, and wireless capabilities, enabling
real-time monitoring of hazardous gases in confined spaces. The
product also features real-time gas concentration monitoring and
data monitoring, supporting remote real-time monitoring via mobile
phones and PCs. This device enables wireless setup of alarm
networks, achieving comprehensive alarm monitoring, real-time
alarming, and alarm sharing. This ensures immediate detection of
hazards and prompt evacuation.
>>Features
• Over 30+ plug-and-play smart original imported sensors are
available for selection, allowing flexible configuration and
arbitrary combinations.
• Multiple gas sensors can be independently activated or
deactivated, effectively avoiding cross-interference between
detected gases and extending sensor lifespan.
• Equipped with an embedded 32-bit ultra-low-power microprocessor
for short response time, minimal detection error, and high
resolution.
• Includes an infrared remote control for menu operations, enabling
safe, non-invasive adjustments in hazardous environments without
opening the device.
• Intelligent temperature/humidity compensation and zero-point
calibration algorithms, along with fully automated software
calibration (for 2+ target points), ensure measurement accuracy.
Automatic startup self-test for sensors and components.
• Supports unit switching between PPM/mg/m³ and %VOL/mg/L, as well
as bilingual (Chinese/English) interface switching.
• Real-time data transmission with multiple alarm methods to
deliver precise local and remote wireless alarm notifications.
• High-strength aluminum alloy gas chamber design, wear-resistant
and corrosion-resistant, suitable for harsh industrial
environments.
• Automatic layout adjustment based on sensor quantity.
Auto-storage for up to 300,000 sets of data; expandable to over 10
million sets with an optional TF storage card.
• Short-range RTU or unlimited-distance GPRS wireless transmission
via built-in modules to send real-time data and alarm status to
safety centers.
• Explosion-proof rating: Exd II CT6, certified by the National Explosion Protection and Electrical
Safety Center.
>>Main technical parameters
Detected Gases | Toxic, harmful, and combustible gases; actual detected gases are
subject to the factory label. |
Detection Principle | Catalytic combustion, electrochemical principle, infrared
principle, or PID (Photoionization Detector) principle (depending
on gas type). |
Measurement Range | Varies by detected gas, as specified on the factory label. Options include: 0-20ppm, 50ppm, 100ppm, 200ppm, 500ppm, 1000ppm, 2000ppm, 5000ppm,
10,000ppm, 50,000ppm, 100%LEL, 0-2%VOL, 5%VOL, 10%VOL, 30%VOL,
100%VOL, etc. |
Resolution | 0.01ppm (0–99ppm) 0.1ppm (0–999ppm) 1ppm (≥1000ppm) 0.01%VOL (0–100%VOL) 0.1%LEL (0–100%LEL) |
Configuration Options
| Single, dual-combo, triple-combo, or quad-combo. Sensors in
dual-combo or higher configurations can be independently
activated/deactivated to avoid gas interference and extend sensor
lifespan. |
Sampling Method | ① Natural diffusion — Continuous online detection via natural diffusion. ② Pump suction — Built-in air pump and flow-through adapter for pump-suction
detection (optional). |
Zero Drift | ≤±1% (FS/year) |
Battery | Rechargeable lithium battery: 2800mAh (24V). Single gas: >16 hours operation. Quad-combo: >12 hours operation (without pump). Pump-equipped lithium battery: 6800mAh (24V). |
Air Pump (Optional) | Suction flow rate: 4.5L/min (10L/min optional). Suction distance: ~5m to 20m (depends on resistance). Lifespan: ~8000 hours of continuous operation. Pressure range: 20kPa to 60kPa (negative pressure). |
Environmental Pressure | 86kPa–106kPa |
Operating Temperature | Standard: -20°C to +55°C Extreme: -40°C to +70°C |
Operating Humidity | 10%–95%RH (non-condensing) |
Output Signal | 4-20mA; RS485 (customizable upon request). |
Explosion-Proof Rating | Ex d II CT6 Gb (main unit) |
Protection Rating | IP66 |
Dimensions | 380mm (H) × 270mm (W) × 115mm (D) |
Weight | Approx. 5.8kg (aluminum alloy casing) |
Company Profile
JUGE was established in 2015, specializing in the field of
environmental online monitoring. With environmental online
monitoring systems at its core, JUGE integrates R&D,
production, sales, and after-sales services. It is recognized as
both a National High-Tech Enterprise and a "Specialized, Refined,
Unique, and Innovative" Small and Medium-sized Enterprise, serving
as a comprehensive solution provider for gas and water
environmental protection online monitoring systems.
JUGE provides scientific electrochemical instruments and sensors
for water quality measuring and gas monitoring, such as pH,
conductivity, dissolved oxygen, turbidity, and CEMS System for gas
monitoring with our industry-leading technologies, quality control
system, and customer service.
We strive to empower individuals, organizations, and communities to
better understand and manage water quality by providing innovative
and user-friendly electrochemical instruments and sensors that meet
the needs of all users. Through our work, we aim to create a more
sustainable future for our planet where everyone has access to
accurate and reliable water quality testing technology, and where
the preservation and sustainability of our water resources is a top
priority.
It is believed that after such a long accumulation of years, our
professional ability in the water treatment and gas treatment
industry will also provide better technical support to our partner.
Our target is to serve our customers efficiently and creatively in
order to save their money and time. Any requirements from you will
be responded in 24 hours. We sincerely wish to cooperate with
friends all over the world.