1.5mm thickness textured surface with hole 3D HDPE Geocell retaining wall prevent the slope Driveway

1.5mm thickness textured surface with hole 3D HDPE Geocell retaining wall prevent the slope Driveway

Geocell is a kind of three-dimensional network structure shaped by high-strength HDPE (high density polyethylene) sheets through ultrasonic welding of high strength. Currently, it is widely used in construction, such as highway, railway, bridge, embankment, etc., the honeycomb grid can be filled with various materials provides a solution for erosion control, load support and earth retention projects

3D Honeycomb Road Geocell Different Types :

1. smooth surface without hole
2. smooth surface with hole
3. textured surface with hole
4. textured surface without hole

3D HDPE geocells Common applications :

1.Roads and pavements: Used for stabilizing the subgrade and base course of paved and unpaved roads, driveways, and parking lots.

2.Erosion control: Applied on steep slopes (up to 45 degrees), embankments, and riverbanks to prevent soil erosion and promote vegetation growth.

3.Retaining walls: Used for constructing reinforced, tiered retaining walls and gravity structures.

4.Channel and riverbank protection: Protects against scour and erosion in riverbeds, channels, and drainage ditches.

5.Railway subgrade reinforcement: Used to stabilize the track bed for railways

Road Construction Geocell Geocell Retaining Walls

Slope Protection Geocell Channel Protection Geocell

Gruound Stabilisation
Cellular Confinement Systems strengthen the aggregate infill, thereby simultaneously enabling the use of poorly graded inferior material for infill as well as reducing the structural support layer thickness.Typical stabilisation applications include reinforcement of base and subbase layers in flexible pavements, including: roads, railway substructure and ballast confinement;working platforms in intermodal ports; airport runways.

Retaining Wall
Cellular Confinement Systems provide steep vertical mechanically stabilized earth structures (either gravity or reinforced walls)
for steep faces, walls and irregular topography

Slope Pretection
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.

Load Support
Cellular Confinement Systems have been used to improve the performance of both paved and unpaved roads by reinforcing the soil in the subgrade-base interface or within the base course. The effective load distribution of geocell creates a strong,stiff 3D cellular mattress which can reduce vertical differential settlement into soft subgrades, improves shear strength, and enhances load-bearing capacity, while reducing the amount of aggregate material required to extend the service life of roads.

Plastic HDPE Geocell Technical parameter:

Seam Peel Strength
Definition:
This refers to the strength of the weld between the geocell panels.
Classification:
Higher seam peel strengths are desirable, indicating a more robust and durable product. Manufacturers list these strengths as key specifications for their products, such as ≥1000 N, ≥1500 N, or ≥2000 N.

Geocell supporting installation tools

1.Butterfly key for quicker connection of HDPE gecell sections

2.Anchor & stake clip for geocell

Welcome to contact with Yixing Shenzhou HDPE GEOCELL

Email : amelie@geogrid.cn

Whatsapp : 0086 13815119816

3D Geocell Grid Key Factors Influencing Type Selection:

Project Requirements:
The specific application, such as slope protection, road reinforcement, or parking lot stabilization, will dictate the best type of geocell.
Performance Characteristics:
The choice depends on desired performance qualities like drainage, load distribution, and soil stabilization.
Site-Specific Conditions:
Factors like soil type and water management needs also influence the selection

Yixing Shenzhou Geosynthetics was established in 2004, Designed and manufactured in-house at ISO 9001 certified manufacturing facilities our line to meets demanding

QA/QC requirements and are continuously tested to rigorous ASTM standards both in-house and by leading independent geosynthetics.

Product availability:

Plastic Geogrid ( Biaxial / Uniaxial / Triax / Hexagon )

Warp knitted Fiberglass geogrid coated with bitumen

Warp knitted woven coated polyester geogrid

Non Woven Geotextile with PET and PP material. With staple fibre and filament process

HDPE / LDPE / LLDPE Geomembrane

Geocomposited Geogrid / Geocomposited membrane

GCL

Custimized product

We warmly welcome all friends and customers from home and abroad to visit our company,give us advice & suggestion,and get win-win cooperation.