Our Features
1. Easy to mount. Because the inlet and outlet is located on the same central line,
the pump can be directly mounted on any part of the pipeline just
as a valve. Covered with a rain-proof cap, it can be operated outdoors.
2. Impeller mounted directly on the long axis of the motor, pump
and motor bearing arrangement is reasonable, pump operation can
effectively balance the radial and axial loads, thus ensuring the
smooth operation of the pump, small vibration and low noise.
3. Mechanical shaft seal, use of imported titanium alloy seal ring,
medium and high temperature mechanical seal with carbide materials,
anti-wearing no leakage.
4. Easy installation and maintenance, no need to open pipeline
system, the rotation parts of the pump can be pulled out by
removing the screws on the pump.
5. According to the needs of flow and head, the pump can be used in
series or parallel operation mode.
Working Conditions
1. Suction pressure ≤ 1.0 MPa, the maximum pump system working
pressure≤ 1.6 MPa, the pump hydrostatic test pressure ≤ 2.5 MPa.
2. Ambient temperature < 40 degrees, relative humidity≤ 40%.
3. Content of solid particles in the medium per unit volume does
not exceed 0.1%, particle size < 0.2 mm.