High Temperature Thermal Expansion Instrument Meter Tester Deformation Dilatometer PCY-1200
Brand Name:LONROY
Minimum Order Quantity:1
Place of Origin:Guangdong, China
Furnace temperature range:1200ºC, 1400ºC, 1700ºC
Heating speed:0 ~ 100 degrees/min
Expansion measurement range:±5mm
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
A31, 11 Floor, No 1 Building, Minjian Jinrong Building, No 111 Guantai Road, Sanyuanli Community, Nancheng Street, Dongguan, Guangdong, China
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
PCY-1200 high temperature thermal expansion instrument thermal
expansion coefficient instrument thermal expansion meter
1.Product introduction
The instrument mainly measures the U(K) value of the heat transfer
coefficient of vacuum glass, which complies with the standard
JC/T2708-2022 "Test method for heat transfer coefficient of vacuum
glass". It can also test homogeneous plate materials such as
plastics, rubber, glass, fiber, benzene board, extruded board,
foamed concrete, hollow glass, wood board, various insulation
materials, etc. At the same time, it can measure the thermal
conductivity of various materials such as granular materials, bulk
materials, soft materials, etc. Applicable standards:
GB/T10294-2008 "Determination of steady-state thermal resistance
and related properties of insulation materials"; GB/T3399-1982
"Test method for thermal conductivity of plastics-heat-protected
flat plate method"; GB/T10801.1-2002 "Polystyrene foam plastics for
thermal insulation" specifies the measurement of thermal
conductivity of polyurethane rigid foam materials; GB/T10801.2-2002
"Extruded polystyrene foam plastics for thermal insulation (XPS)"
specifies the measurement of thermal conductivity of extruded
polystyrene foam plastics; GB/T3139-2005 "Test method for thermal
conductivity of fiber reinforced plastics"; GB/T 17794-2008
"Flexible foam rubber and plastic insulation products".
PCY-1200 high temperature thermal expansion instrument thermal
expansion coefficient instrument thermal expansion meter
2. Product Parameter
| furnace temperature range | 1200ºC, 1400ºC, 1700ºC by customer choice. |
| heating speed | 0 ~ 100 degrees/min adjustable, computer program temperature
control. |
| expansion value measurement range | ±5mm |
| measuring expansion value resolution | 0.1 ~ 1um, automatic calibration range |
| the sample range | (2 ~ 15) × (2 ~ 15) × (20 ~ 150) mm, square/round can be. |
| system measurement error | ±0.1 ~ 0.5%. |
| power supply voltage | 220V±10%, 2KW. |
automatically calculate the compensation coefficient and automatic compensation, but also manual correction (online).
Automatic record, storage and print number noted, and print temperature-expansion coefficient curve; The temperature spacing is freely set, and the spacing is 1ºC.
the use of imported linear bearing transmission, to achieve non-friction transmission of expansion value, transmission accuracy and repeatability is excellent.
The instrument is equipped with standard computer interface, which can be connected with general computer. All test operations are completed by computer interface, which is convenient to operate and easy to learn and provides a full set of software.
Company Information
High Temperature Thermal Expansion Instrument Meter Tester Deformation Dilatometer PCY-1200
Inquiry Cart
0