

Add to Cart
The LRXZ-II Sanitary Ceramics Flushing Test Device adopts a
variable frequency constant pressure water supply system as the
pressure supply unit of the device, which is automatically
controlled. It features simple operation and accurate testing. This
test device complies with the standard GB 26730-2011 "Sanitary Ware
- Test Methods for Gravity Flushing Devices and Sanitary Ware
Frames for Toilets", and meets the requirements for test equipment
stipulated in GB6952-2005 "Sanitary Ceramics" and JC/T931-2003
"Mechanical Flushing Valves for Toilets". It is mainly used as a
testing device to examine the flushing performance of sanitary
ceramic toilets, squat toilets, and urinals.The test device is
mainly composed of an electrical cabinet, a test box, a water
supply system and a control system.
2.Working Principle
The LRXZ type sanitary ceramic flushing test device adopts a
variable-frequency constant-pressure water supply system as the
pressure supply unit of the device. After the test begins, the
pressure and flow signals of the real-time flushing water flow are
detected by the pressure sensor and flow sensor installed on the
outlet pipe, and are fed back to the control system. The control
system compares the feedback signal with the set signal, adjusts
the water supply output of the system according to the actual
situation, and at the same time weighs the water consumption of the
sample with an electronic scale, thereby achieving the detection of
the flushing performance of sanitary fixtures.
3.Technical Parameter
Parameter | Specification |
Test Pressure | 0.05 ~ 0.55 MPa |
Water Consumption | 3 ~ 11 L/cycle |
Outlet Pipe Diameter | Ø 20 mm, Ø 40 mm |
Dimensions (L×W×H) | 2300 × 1800 × 890 (mm) |
Power Supply | AC 380V, 50 Hz |
Control System | Smart touchscreen computer control (User-friendly operation) |