The plastic pipe impact testing machine is suitable for impact testing of various plastic pipes, plastic corrugated pipes, etc., to determine the required impact energy value for pipe failure, and thus determine its impact strength. It meets the requirements of GB/T14823.2 "Special Requirements for Electrical Installation Conduits - Rigid Insulated Material Flat Conduits", JG/T3050 "Insulated Electrical Conduits and Accessories for Buildings", and ZBG33008 "Polyvinyl Chloride Plastic Corrugated Wire Conduit".
This testing machine has a simple structure, easy operation, intuitive and reliable, so its application is becoming increasingly widespread.
1, Technical parameters
Impact energy: 6J
Impact height: 300mm
Heavy hammer weight: 1kg 2kg
End of interval steel block
Curvature radius: R300mm
Workbench type: flat or 120 ° V-type
Dimensions: Length x Width x Height: 300 x 140 x 670mm
Weight: Quantity: 20kg
2, Structural description
This testing machine consists of a base, a column, a guide rod, a hammer, and a hook.
3, Operation
1. Place the testing machine steadily and place a rubber plate under the base.
2. Wipe the testing machine clean and inject thin oil onto the columns and guide rods.
3. Loosen the fastening screws, lift the guide rod, place the bell on the hook, and then place the spacing steel block at the bottom of the guide rod.
4. Place the sample on the cushion plate and make contact between the spherical portion of the spacer steel block and the highest point of the sample.
5. The guide rod is triangular with four scale lines from bottom to top, representing heights of 0, 100, 200, and 300mm respectively.
After aligning the 0 mark with the upper part of the spacing steel block, tighten the fastening screw.
6. Loosen the stop screw, move the crossbeam so that the bottom of the bell is level with the desired height mark, and then tighten the stop screw.
7. Press both hooks simultaneously to make the bell fall and impact the specimen through the spaced steel blocks.
8. Lift the interval steel block, remove the sample, and observe for cracks or damage.
9. After the experiment is completed, the bell, cushion plate, spacing steel block and other parts should be wiped clean and stored in a dry place. Do not impact without a sample.

CHENGFENG is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment

About CHENGFENG Company:

CHENFENG TESTING EQUIPMENT CO., LTD (DAXIAN INSTRUMENT EQUIPMENT CO., LTD) is Located in Changan Town (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation.

We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.

CHENGFENG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable,textile and fabrix, etc.

All CHENGFENG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.

Our service:
1. High quality guarantee.
2. Shipment with professional documents.
3. Packing as your request, with photo before shipment.
4. Reply within 48 hours and provide solution within 3 working days
5. Professional after-service from our engineers.
6. Warranty period 12 monthes.

Our advantages:
1. Professional technology support.
2. Full experience of large numbers containers loading in Chinese sea port.
3. Fast shipment by reputed shipping line.
4. Best service after shipment with emails.
5. We are professional test equipment manufaturer in China with excellent experience and skills, also have best quality products.

6. In-time after-sale service.