Single Component Polyurethane Grouting Fluid Material Water Soluble Waterproof
Brand Name:LIHONG
Certification:ISO9001,14001,45001,Halal certification,OU certification
Model Number:Water Soluble Polyurethane Grouting Fluid Material
Minimum Order Quantity:2mt
Delivery Time:10-15days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Hefei China
Address:
BUILDING A LINBIN YUAN NO 5116 HUIZHOU AVENUE HEFEI CHINA
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Single Component
Water-Soluble
Polyurethane Grouting Fluid
Single Component Hydrophilic Polyurethane Grouting fluid is a kind of polymer chemistry grouting material, which is made of hydrophilic polyether polyols and Isocyanate. The material reacts with water to form an elastic colloidal solid, thus achieving a good water-stopping effect. It is a new high-pressure grouting material for water-proof and leak-stopping.
This product is produced by our company through the introduction of advanced foreign technology. Polyurethane grouting material is a kind of high elasticity and toughness gel with low shrinkage and compact structure, which is polymerized after mixing with water and then rapidly foamed, expanded and solidified. This product has a very superior self repairing function by repeatedly foaming with water, and its waterproof and leak stopping effect is 2-3 times that of traditional leak stopping materials.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product Features
—
1) When the slurry meets water, it will undergo chemical reaction
immediately and disperse, emulsify and foam by itself to form an
impermeable elastic colloidal solid with good water-stopping
performance.
2) Quick response, high strength and strong packing.
3) With the aid of the gas pressure, the grout can further press into
the voids of the structure, so that the porous structure or the
formation can be completely filled and compacted.
4) The slurry has good swelling property, large water inclusion
capacity, good hydrophilicity and filling property. And the
viscosity of the slurry, curing speed can be adjusted according to
needs.
Strengthened hydrophilic polyurethane grouting material, strong toughness, good water wrapped.
—
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product specification
—
| Type | Ι | Ⅱ | Ⅲ | Ⅳ |
Performance of water coating | 25 times up | 20 times up | 15 times up | 10 times up |
Performance
—
Industry standard: JL/T2041-2010
Number | Test Items | Standard Regulations | Inspection results | Single item evaluation | |
| Project Name | Unit | ||||
| 1 | Appearance | Uniform Liquid, No Impurities, Non Layered, | Qualified | ||
2 | Density | G/Cm3 | ≥ 1.0 | 1.05 | Qualified |
3 | Gel Time | S | ≤ 18 | 15 | Qualified |
| 4 | Water Inclusion (10 Times Water)) | S | ≤ 25 | 20 | Qualified |
| 5 | Non-Volatile Content | % | ≥ 76 | 81 | Qualified |
6 | Viscosity | Mpa.s,25℃ | ≤ 1.0×103 | 500 | Qualified |
Central control indicators
—
1. Isocyanate content (%) 6.5-7.5
2. Water encapsulation (requires the addition of L4, BT, and Ding
before performing water encapsulation)
Type I (15 times water): ≤ 50s Type II (10 times water): ≤ 50s Type
III (10 times water): ≤ 50s
All picking indicators
—
| Serial | Testing items | Ⅰ | Ⅱ | Ⅲ |
| 1 | Appearance | Uniform Liquid, No Impurities,Non Layered, | ||
| 2 | Viscosity(mPa.S,25℃ ) | 200 ～ 400 | 200 ～ 400 | 200 ～ 400 |
| 3 | Density(g/cm3) | 1.00 | 1.00 | 0.95 |
| 4 | Coagulation Time (S) | 30 | ||
| 5 | Water Inclusion | 40 | 40 | 45 |
| 6 | Non-Volatile Content(%) | 75 | 75 | 70 |
| 7 | Frothing Percentage(%) | 350 | 350 | 300 |
Note: When conducting water-based central control, a water inclusion test should be conducted first. If there are abnormal situations such as white spots, translucency, or inability to contain water during the water inclusion process, it is judged as unqualified, and the content of - NCO should be measured at the same time.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Application
—
1. All kinds of buildings and underground concrete engineering
cracks, expansion joints, construction joints, structural joints
sealing leakage.
2. In the coal mining or other mining project, the water shuts in
the tunnel, the roof and so on broken layer reinforcement.
3. Strengthening of Bridge Foundation and bridge cracks.
Note
—
1. Wear protective equipment (such as gloves, goggles) during
construction to avoid direct contact with the skin, if there is
contamination should be washed with plenty of water.
2. This product is stored in a cool place, construction must pay
attention to ventilation and away from the source of fire materials
not solidified before the construction area away from open fire.
Polyurethane Grouting Fluid · Grouting Material · Made In China
Product packaging
—
1. Stored in clean, dry and sealed iron drums
2. Transport according to regular product requirements, prevent
rain, exposure, squeezing, and collision, and ensure that th
packaging is intact.
3. The product should be stored in a ventilated, dry and cool
place, away from direct sunlight and rain. The storage temperature
should not be higher than 40℃.
4. Under normal storage conditions, the shelf life is 9months.
Polyurethane Grouting Fluid · Grouting Material · Made In China
FAQ
—
Q:Are you a factory or trading company?
We are a factory.
Q:Where is your factory located? How can I visit there?
Our factory is located in Huai'an City, Jiangsu Province, China.
All our clients, from home or abroad, are warmly welcome to visit
us!
Q:Can I get some samples?
Yes, we can supply the free sample, but the shipping cost be paid
by our customers.
Q:Can you accept small order?
Yes.
Q:What is term of payment?
1) 30%T/T down payment and balance against the copy of B/L;
2) or 100% L/C at sight.
Q:How about delivery leadtime?
About 7-14 days after payment confirmed. (Except Chinese holiday)
Which port will be used as loading port?
Nanjing Port or Shanghai Port.
How to confirm the Product Quality before placing orders?how can we
guarantee quality?
You can get free samples for your testing.We can manufacture the
products according to your specific requirment. Always a
pre-production sample before mass production;
Always final Inspection before shipment;
Q:How about import customs fee?
A:Our sales will declare the value as customer's require normally.
Import duties, taxes and charges are not included in the itemprice
or shipping. These charges are the buyers' responsibility. Please
check with your country customs office to determine what these
additional cost will be prior to bidding/buying. If the goods were
turned back or destroyed for unable ustoms-clearance, the related
cost will be paid by customers.
Polyurethane Grouting Fluid · Grouting Material · Made In China
About Us
—
Jiangsu Lihong Technology Development Co., Ltd. is a national high-tech enterprise integrating R&D, production, sales and technical services. The company is located in the Salt Chemical New Materials Industrial Park in Huai'an City, Jiangsu Province, covering an area of 150 acres. The total investment of the factory exceeds RMB 500 million. Currently, there are 14 production lines that lead the industry with independent innovation, with an annual production capacity of more than 100,000 tons.
The company is the key laboratory of green polyurethane materials in Huai'an City, a national high-tech enterprise, a specialized and innovative small and medium-sized enterprise in Jiangsu Province, a private technology-based enterprise in Jiangsu Province, and a member unit of the China Polyurethane Industry Association.
Certificates ( Click to enter )
Polyurethane Grouting Fluid · Grouting Material · Made In China
Single Component Polyurethane Grouting Fluid Material Water Soluble Waterproof
Inquiry Cart
0