 
                            
Add to Cart
Inductive Sensor PNP NC Quasi-flush M12 Connector Detection Distance 2mm
This M12 connector inductive proximity sensor features a PNP normally closed (NC) output with quasi-flush mounting for reliable detection of metallic objects at 2mm range. The compact design and standardized M12 interface ensure easy integration into automated systems.
Features:
PNP Normally Closed (NC) Output – Sourcing output (breaks circuit when target detected)
Quasi-Flush Mounting – Partial side detection capability with reduced interference
2mm Sensing Distance – Precise detection for small metal components
M12 Quick-Connect Interface – 3-wire or 4-wire versions available
LED Status Indicator – Power-on and detection confirmation
10-30V DC Operating Voltage – Compatible with industrial control systems
IP67 Protection Rating – Resistant to dust, water, and temporary immersion
| Installation type | Quasi-flush | 
| Sensing range Sn | 2mm | 
| Detected object | Magnetic metal | 
| Standard detection object(iron) | 12x12x1mm | 
| Set distance | 0-1.6mm | 
| Tolerance distance | Detection distance below 10% | 
| Response frequency | 800Hz | 
| Working voltage | 10-30VDC | 
| Leakage current | <0.8mA | 
| Max. load current | 200mA | 
| Voltage drop | <1V | 
| LED display | Red | 
| Protection circuit | Surge protection circuit,short circuit protection,polarity reversal protection | 
| Ambient temperature | During operation:-25 to+70°C(no freezing,no condensing) | 
| Ambient humidity | During operation and shorage: 35-95%RH(no condensing) | 
| Effect of temperature | Temperature range-25 to 70°C,with a detection distance within ±10% for every 20°C change | 
| Effect of voltage | When the rated power supply voltage fluctuates within ±15%,the detection distance changes within ±1% | 
| Insulation resistance | >50MΩ | 
| Withstand voltage | AC1000V | 
| Vibration resistance | 10 to 55 Hz, up and down amplitude 1.5 mm in the X, Y, and Z directions for each 2 hours | 
| Impact resistance | 500m/S ², 10 times in each direction of X, Y and Z | 
| Connection type | M12 Connector | 
| Sensing surface meterial | PBT | 
| Protection grade | IP67 | 
| Dimension | Connecting Diagram | 
