Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

Brand Name:Hongshun
Certification:ISO9001
Model Number:HS-Seal102
Minimum Order Quantity:10 Boxs
Delivery Time:10 days
Payment Terms:L/C,T/T
Contact Now

Add to Cart

Verified Supplier
Location: Dongguan China
Address: Building 1, No. 13, Sanheng Road, Lianhu South, Tangxia Town, Dongguan City
Supplier`s last login times: within 29 hours
Product Details Company Profile
Product Details

Medium-temperature sealants for anodic oxide films of aluminum and aluminum alloys


Introduction

Medium-temperature sealants for anodic oxide films of aluminum and aluminum alloys.

It has a good sealing effect and a smooth and fine touch. There are some adverse phenomena such as dye sealing hole fading, powder film, and gray mist.

It is particularly suitable for sealing the aluminum oxide film on the shells of electronic products and high-end cosmetics with strict requirements for sealing quality.

Compared with other sealing agents on the market, it has a more superior cost performance.


Appearance

Light green powder.


Usage method

When establishing the bath, the pH is 5.5. As the sealing solution is used and water, acids and bases are introduced, the pH will change.
It is recommended to use an acid-resistant and high-temperature type filter for filtration. Lower the pH value with dilute acetic acid and increase it with NaOH.
The specific gravity of the product varies depending on the processing conditions, approximately 3-4m ² /g.


Analytical Methods:

1. Add 10 ml of sealing solution and 100ml of pure water;

2. Add 10ml of 6N-ammonia water and 2-3 drops of triethanolamine;

3. Add 0.2g of MX indicator (the solution turns orange);

4. Titrate with 0.01M-EDTA standard solution until the solution turns purple-red (A ml).


Notes

1.Please read the user manual and the MSDS of this product carefully before using it.

2. Please keep away from fire and heat sources and ensure good air circulation in the workplace.

3.When operating, please wear protective glasses, masks, gloves and other protective equipment to avoid contamination and injury from the medicine. Wash your hands and rinse your mouth after doing homework.

4. If it accidentally gets into the eyes, rinse immediately with clean water for 15 minutes and then seek medical attention promptly.

5. Do not open and store for a long time. Keep it sealed.

China Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage supplier

Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

Inquiry Cart 0