
Add to Cart
Smart Managed 24-Port Gigabit PoE Switch
Key Featrues
Service
Specification
| General | |
| Shell | Metal material |
| Net Weight | 2.975 kg(6.56 Ib) |
| Gross Weight | 3.535 kg(7.79 Ib) |
| Dimensions (W×H×D) | 440.00 mm×44.00 mm×221.00 mm(17.32"×1.73"×8.70") |
| Operating Temperature | 0℃ to 45℃(0 °Fto 113°F) |
| Storage Temperature | -40°℃ to 85℃(-40 Fto 185 °F) |
| Operating Humidity | 5%to 95%(no condensation) |
| Relative Humidity | 5%to 95%(no condensation) |
| Power Supply | 100 to 240 VAC,50/60 Hz,Max.6.3A |
| Installation Mode | Rack(equipped with mounting ears) |
| Max.Power Consumption | 400W |
| Power Consumption In Idle | 30W |
| Network Parameters | |
| Ports | 24×Gigabit PoE port,2×Gigabit fiber optical port |
| MAC Address Table | 8K |
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
| Internal Cache | 4.1 Mbits |
| PoE Power Supply | |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span:1/2(+),3/6(-); |
| PoE Port | PoE:Ports 1 to 24 |
| Max.Port Power | 30W |
| PoE Power Budget | 370W |
| Software Function | |
| Long Range | Ports 1 to 24:up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| Port isolation | Ports 1 to 24:port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other,but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 24:auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to
form a logical port for load balancing,bandwidth expansion,and port
protection. Support static link aggregation. Support 8 aggregation groups. |
| QoS | QoS is used to allocate bandwidth to different services so as to
provide end-to-end service quality assurance. Support port-based priority configuration. Support SP,WRR priority schedule mode. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops,which will seriously affect network communication.Disabled by default.Support 802.1D STP. |
| VLAN | VLAN is used for network scale planning and network health
improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk,Access port mode. Support Max.4094VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner
Pro.Functions supported: 1.Display the port rate. 2.Display the port bandwidth utilization rate. 3.Display topology information. 4.Display the alarm status. 5.Restart ports and devices. 6.Remotely upgrade the device. |
| System Maintenance | Remote upgrade,default parameters recovery,logs viewing,basic
network parameters configuration,import and export configuration,time sync |
| Port Rate-Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent
network congestion. |
| Storm Control | Storm control is used to prevent switch ports from being blocked by
broadcast or multicast storms in the LAN,which may affect network communication. Support port rate limiting based on broadcast,multicast,and unknown unicast packets. |
| Approval | |
| EMC | FCC(47 CFR Part 15,Subpart B); CE-EMC(EN 55032:2015,EN IEC61000-3-2:2019,EN61000-3-3:2013+A1:2019,EN 50130-4:2011 +A1:2014,EN 55035:2017); IC(ICES-003:Issue 6); RCM(ASNZS CISPR 32:2015) |
| Safety | UL(UL60950-1); CB(IEC 60950-1:2005,AMD1:2009,AMD2:2013,IEC 62368-1:2014(Second Edition); CE-LVD(EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013,EN 62368-1: 2014+A11:2017) |
| Chemistry | CE-RoHS(201165EU); WEEE(201219EU); Reach (Regulation(EC)No.19072006) |